An Act to provide for the protection of integrated circuit topographies and to amend certain Acts in consequence thereofIntegrated Circuit Topography ActIntegrated Circuit Topography1990June
27
201105
30
I-14.6371990Her Majesty, by and with the advice and consent of the Senate and House of Commons of Canada, enacts as follows:SHORT TITLE
Short titleThis Act may be cited as the Integrated Circuit Topography Act.
INTERPRETATION
DefinitionsIn this Act,commercially exploitexploitation commercialecommercially exploit means to sell, lease, offer or exhibit for sale or lease, or otherwise distribute for a commercial purpose;filing datedate de dépôtfiling date, in respect of an application for registration of a topography, means the filing date of the application as determined in accordance with section 17;integrated circuit productcircuit intégréintegrated circuit product means a product, in a final or intermediate form, that is intended to perform an electronic function and in which the elements, at least one of which is an active element, and some or all of the interconnections, are integrally formed in or on, or both in and on, a piece of material;MinisterministreMinister means the Minister of Industry;nationalressortissantnational, in respect of a country, includes an individual who is a citizen or resident of, or is domiciled in, that country;prescribedVersion anglaise seulementprescribed means prescribed by regulations;registerregistreregister means the register kept pursuant to section 15;registered topographytopographie enregistréeregistered topography means a topography that is registered under this Act;RegistrarregistraireRegistrar means the Registrar of Topographies designated pursuant to section 25;topographytopographietopography means the design, however expressed, of the disposition ofthe interconnections, if any, and the elements for the making of an integrated circuit product, orthe elements, if any, and the interconnections for the making of a customization layer or layers to be added to an integrated circuit product in an intermediate form.Deemed importation or commercial exploitationFor the purposes of this Act, where an integrated circuit product forms part of an article that is imported or commercially exploited, the integrated circuit product shall be deemed to be imported or commercially exploited, as the case may be.First commercial exploitation of topographyFor the purposes of this Act, a topography is first commercially exploited when the topography or a substantial part thereof, or an integrated circuit product that incorporates the topography or a substantial part thereof, is commercially exploited for the first time in any place in the world by or with the consent of the person who owns the right to so commercially exploit the topography at that time and in that place.Deemed creator of topographyFor the purposes of this Act, where a topography is created in the course of employment or pursuant to a contract, the employer or party to the contract for whom the topography was created shall be deemed to be the creator of the topography unless the employer and employee or the parties to the contract, as the case may be, otherwise agree.
  • 1990, c. 37, s. 2;
  • 1992, c. 1, s. 145(F);
  • 1995, c. 1, s. 62.
HER MAJESTY
Binding on Her MajestyThis Act is binding on Her Majesty in right of Canada or a province.
  • 1994, c. 47, s. 129.
EXCLUSIVE RIGHT
Exclusive right on registrationSubject to this Act, the registration of a topography under this Act, unless shown to be invalid, gives to the creator of the topography or, where the topography has been transferred, the successor in title thereto, an exclusive right in the topography for the duration of the period referred to in section 5.Scope of exclusive rightThe exclusive right in a registered topography consists of the exclusive right toreproduce the topography or any substantial part thereof;manufacture an integrated circuit product incorporating the topography or any substantial part thereof; andimport or commercially exploit the topography or any substantial part thereof or an integrated circuit product that incorporates the topography or any substantial part thereof.Rights not conferredNothing in this section confers any rights in relation to any idea, concept, process, system, technique or information that may be embodied in a topography or an integrated circuit product.
Conditions of registrationSubject to subsection (4), a topography is registrable under this Act only if the following conditions are met:the topography is original;an application for registration of the topography, containing the information and material required by subsection 16(2) and accompanied by the fee required by subsection 16(3), is filed with the Registrar before the topography is first commercially exploited or within two years thereafter; andthe creator of the topography is, at the time of its creation or on the filing date of the application,a national of Canada or an individual or legal entity that has in Canada a real and effective establishment for the creation of topographies or the manufacture of integrated circuit products,a national of a country that, either directly or through its membership in an intergovernmental organization, affords protection for topographies in accordance with a convention or treaty to which that country or intergovernmental organization and Canada are contracting parties, or an individual or legal entity that has in such a country or in the territory of a member state of such an intergovernmental organization an establishment of the kind referred to in subparagraph (i),a national of a country or of a member state of an intergovernmental organization that the Minister has certified by notice published in the Canada Gazette to be a country or intergovernmental organization that confers protection on nationals of Canada or legal entities that have an establishment of the kind referred to in subparagraph (i) that is substantially equal to the protection conferred by this Act, or an individual or legal entity that has in such a country or in the territory of a member state of such an intergovernmental organization an establishment of that kind, ora national of a WTO Member.OriginalityFor the purposes of subsection (1), a topography is original if the following conditions are met:it has not been produced by the mere reproduction of another topography or of any substantial part thereof; andit is the result of an intellectual effort and is not, at the time of its creation, commonplace among creators of topographies or manufacturers of integrated circuit products.Combinations of elements or interconnectionsWhere a topography consists of a combination of elements or interconnections that are commonplace among creators of topographies or manufacturers of integrated circuit products, the topography shall be considered to be original only if the combination, considered as a whole, meets the conditions referred to in subsection (2).ExceptionA topography that is not registrable by reason that the condition set out in paragraph (1)(c) cannot be met is registrable if the topography is first commercially exploited in Canada.DefinitionsIn this section,CommissionercommissaireCommissioner means the Commissioner of Patents;WTO AgreementAccord sur l’OMCWTO Agreement has the meaning given to the word “Agreement” by subsection 2(1) of the World Trade Organization Agreement Implementation Act;WTO Membermembre de l’OMCWTO Member means a Member of the World Trade Organization established by Article I of the WTO Agreement.
  • 1990, c. 37, s. 4;
  • 1993, c. 15, s. 25;
  • 1994, c. 47, s. 130.
Duration of exclusive rightThe exclusive right in a registered topography shall subsist for a periodcommencing on the filing date of the application for registration of the topography; andterminating at the end of the tenth calendar year after the earlier of the calendar year in which the topography is first commercially exploited and the calendar year of the filing date of the application.
InfringementThe exclusive right in a registered topography is infringed by any person who does any act referred to in subsection 3(2) without the consent of the owner of the registered topography.No infringementNotwithstanding subsection (1), it is not an infringement of the exclusive right in a registered topography for any personto do any act referred to in paragraph 3(2)(a) or (b) in relation to that registered topography for the sole purpose of analysis or evaluation or of research or teaching with respect to topographies;to do any act referred to in subsection 3(2) in relation to another topography that is created on the basis of the analysis, evaluation or research referred to in paragraph (a) and that is original within the meaning of subsection 4(2) or (3);to do any act referred to in paragraph 3(2)(c) in relation to a particular integrated circuit product that incorporates that registered topography or a substantial part thereof, at any time after the time at which that particular integrated circuit product is sold in any place by or with the consent of the person who owned the right to sell that registered topography at that time and in that place;to do any act referred to in subsection 3(2) where that act is done for a private and non-commercial purpose; orto bring an integrated circuit product that incorporates that registered topography or a substantial part thereof temporarily into Canada if that integrated circuit product forms part of a vehicle, vessel, aircraft or spacecraft registered in a country other than Canada that enters Canada temporarily or accidentally and is used for a purpose that is necessary or ancillary to that vehicle, vessel, aircraft or spacecraft.No infringementFor greater certainty, it is not an infringement of the exclusive right in a registered topography for any person to do any act referred to in subsection 3(2) in relation to another topography that is independently created.
Transfer of topographyA topography, whether registered or unregistered, is transferable, either as to the whole interest therein or as to any undivided portion thereof.LicenceA topography, whether registered or unregistered and either as to the whole interest therein or as to any portion thereof, may constitute the subject-matter of a licence.
Government may apply to use registered topographySubject to section 7.2, the Commissioner may, on application by the Government of Canada or the government of a province, authorize the public non-commercial use of a registered topography by that government.Terms of useSubject to section 7.2, the use of the registered topography may be authorized for such purpose, for such period and on such other terms as the Commissioner considers expedient, but the Commissioner shall settle those terms in accordance with the following principles:the scope and duration of the use shall be limited to the purpose for which the use is authorized;the use authorized shall be non-exclusive; andany use shall be authorized predominantly to supply the domestic market.NoticeThe Commissioner shall notify the owner of the registered topography of any use of the registered topography that is authorized under this section.Payment of remunerationWhere the use of the registered topography is authorized, the authorized user shall pay to the owner of the registered topography such amount as the Commissioner considers to be adequate remuneration in the circumstances, taking into account the economic value of the authorization.Termination of authorizationThe Commissioner may, on application by the owner of the registered topography and after giving all concerned parties an opportunity to be heard, terminate the authorization if the Commissioner is satisfied that the circumstances that led to the granting of the authorization have ceased to exist and are unlikely to recur, subject to such conditions as the Commissioner deems appropriate to protect the legitimate interests of the authorized user.Authorization not transferableAn authorization granted under this section is not transferable.
  • 1994, c. 47, s. 131.
Prescribed usesThe Commissioner may not, under section 7.1, authorize any use that is a prescribed use unless the proposed user complies with the prescribed conditions.
  • 1994, c. 47, s. 131.
AppealAny decision made by the Commissioner under section 7.1 or 7.2 is subject to appeal to the Federal Court under the Patent Act.
  • 1994, c. 47, s. 131.
RegulationsThe Governor in Council may make regulations for the purpose of implementing, in relation to registered topographies, paragraph 2 of Article 37 of the Agreement on Trade-related Aspects of Intellectual Property Rights set out in Annex 1C to the WTO Agreement.Definition of “WTO Agreement”In subsection (1), WTO Agreement has the same meaning as in subsection 4(5).
  • 1994, c. 47, s. 131.
LEGAL PROCEEDINGSAction for Infringement
Action for infringementAn action for infringement of the exclusive right in a registered topography may be brought in any court of competent jurisdiction by the owner of the registered topography or by a licensee of any right therein, subject to any agreement between the licensee and the owner.Each owner to be partyEach owner of a registered topography shall be or be made a party to any action for infringement of the exclusive right therein.
Power of court to grant reliefIn an action for infringement of the exclusive right in a registered topography, a court of competent jurisdiction may make such orders as the circumstances require, including orders providing for relief by way of injunction, the payment of royalties and the recovery of damages or profits, for punitive damages, and for the disposal of any infringing integrated circuit product or any article of which an infringing integrated circuit product forms a part.
Innocent infringementWhere the exclusive right in a registered topography is infringed by reason of the commercial exploitation or importation of an integrated circuit product that incorporates the registered topography or a substantial part thereof and the defendant in an action for infringement establishes that, at the time the defendant acquired the integrated circuit product, the defendant did not know and had no reasonable grounds to believe that the integrated circuit product was manufactured and sold for the first time without the consent of the owner of the registered topography, the defendantis not liable for royalties, damages, profits or punitive damages in respect of any dealings with the integrated circuit product prior to the time when the defendant had actual knowledge that the product was manufactured and sold for the first time without the consent of the owner; andshall have the right to dispose of any inventory of the integrated circuit product or of the article of which the integrated circuit product forms a part that was acquired before the defendant had that knowledge, subject to the condition that the defendant pay a reasonable royalty in respect of that inventory in such amount and at such time as the court may determine.
Infringement after commercial exploitation in CanadaWhere an integrated circuit product that incorporates a registered topography or a substantial part thereof is commercially exploited in Canada by or with the consent of the owner of the registered topography and an action for infringement is commenced in respect of an act of infringement committed after that commercial exploitation, the plaintiff is not entitled to any relief under section 9 other than by way of an injunction if the defendant establishes that, at the time of the infringement, the defendant was not aware and had no reasonable grounds to suspect that the topography was registered.ExceptionSubsection (1) does not apply if the plaintiff establishes that all or substantially all of the integrated circuit products that were commercially exploited in Canada by or with the consent of the owner of the registered topography before the infringement, or all or substantially all of the containers housing those integrated circuit products, were visibly marked with a title of the topography that is substantially the same as a title thereof that, at the time of the infringement, appeared on the register.
Limitation periodSubject to subsection (2), no royalties, damages, profits or punitive damages may be awarded for any act of infringement committed more than three years before the commencement of the action for infringement.ExceptionThe limitation period described in subsection (1) does not apply ifthe infringement is of such a nature that, at the time of its commission, it would not have come to the attention of a reasonably diligent owner or licensee of any right in the registered topography; andthe action for infringement is commenced within three years after the infringement came or should have come to the attention of the plaintiff.
Changes in register not applicableIf any person has relied to the detriment of that person on any entry in the register as it read before being expunged or amended pursuant to this Act or any other Act of Parliament, a court of competent jurisdiction may order that the expungement or amendment not apply in any action for infringement of the exclusive right in a registered topography taken against that person or against any other person who has acquired from that person an integrated circuit product that incorporates the topography or a substantial part thereof.
Other Proceedings
Detention of infringing integrated circuit productsWhere it is made to appear to a court of competent jurisdiction that an integrated circuit product has been imported into Canada or is about to be commercially exploited in Canada contrary to this Act, the court may make an order for the interim detention of the integrated circuit product or any article of which the integrated circuit product forms a part, pending a final determination of the legality of the importation or commercial exploitation in an action commenced within such time as is specified in the order.SecurityBefore an order is made under subsection (1), the plaintiff or petitioner may be required to furnish security, in such form and in such amount as the court may determine, to answer any damages that may by reason of the order be sustained by the owner or consignee of the integrated circuit product or article and for any costs of storage or amount that may become chargeable against the integrated circuit product or article while it remains in detention under the order.IndemnitySubject to paragraph (4)(c), the plaintiff or petitioner in an action referred to in subsection (1) shall be liable to indemnify Her Majesty in right of Canada against any liability or expense that may result from the detention of an integrated circuit product or article pursuant to any order made under subsection (1), whether or not security is furnished pursuant to subsection (2).Lien, disposal and indemnityWhere, by the judgment in an action referred to in subsection (1) that finally determines the legality of the importation or commercial exploitation of the integrated circuit product, the court finds that the importation is or the commercial exploitation would be contrary to this Act,any lien for charges against the integrated circuit product or article, or any hypothecs, prior claims or rights of retention within the meaning of the Civil Code of Québec or any other statute of the Province of Quebec with respect to the integrated circuit product or article, that existed prior to the date of an order made under subsection (1) has effect only so far as may be consistent with the due execution of the judgment;the court may make any order for the disposal of the integrated circuit product or article, including by way of exportation, distribution or destruction, after payment has been made of any taxes or duties owing in respect thereof under any Act of Parliament; andthe owner or consignee of the integrated circuit product or article thereupon becomes jointly and severally liable, with the plaintiff or petitioner, to indemnify Her Majesty in right of Canada under subsection (3).Who may make applicationsAny order under subsection (1) may be made on the application of any interested person either in an action or otherwise and either on notice or ex parte.
  • 1990, c. 37, s. 14;
  • 2001, c. 4, s. 90.
GENERALRegistration
RegisterThere shall be kept under the supervision of the Registrar a register for the registration of topographies and of information and material relating to each registered topography.Register to be evidenceThe register is evidence of the particulars entered therein and documents purporting to be copies of entries therein or extracts therefrom, that are certified by the Registrar, are admissible in evidence in any court without further proof or production of the originals.
Application for registration of topographyThe creator of a topography or, where the topography has been transferred, the successor in title thereto may apply to the Registrar for registration of the topography.Content of applicationAn application for registration of a topography shall contain the following information and material:one or more titles to identify the topography that conform to the prescribed requirements;the date on which, and place at which, the topography was first commercially exploited or, if the topography has not been commercially exploited, a statement to that effect;the name and address of the applicant;a statement describing the interest that the applicant holds in the topography; andsuch other information or material as may be prescribed.FeeAn application for registration of a topography shall be accompanied by the prescribed fee or a fee determined in the prescribed manner.
Filing dateSubject to subsection (2), the filing date of an application for registration of a topography is the date on which the Registrar has received, in respect of the application, the information and material required by subsection 16(2) and the fee required by subsection 16(3).ExceptionThe Registrar may, in such circumstances as are prescribed, assign a filing date to an application for registration of a topography notwithstanding that the requirements of subsection (1) have not been met.Notice to applicantWhere the Registrar assigns a filing date to an application for registration of a topography pursuant to subsection (2), the Registrar shall notify the applicant of that date, of any information or material that is required to complete the application and the amount of the fee, if any, that remains unpaid.Obligations of applicantAn applicant to whom notice is given in accordance with subsection (3) shall, within the prescribed period, file with the Registrar the information or material, if any, that is required to complete the application and the amount of the fee, if any, that remains unpaid and, in default thereof, shall be deemed to have abandoned the application.
Registration of topographySubject to subsection (3), where the Registrar has received the information and material required by subsection 16(2) and the fee required by subsection 16(3) in respect of an application for registration of a topography, the Registrar shall register the topography by entering in the register the following:the filing date of the application;the title or titles of the topography that are contained in the application and that conform to the prescribed requirements; andsuch other information or material as may be prescribed.No inquiryThe Registrar shall not inquire as to the accuracy of any information or material contained in an application for registration of a topography.Registrar may refuse to registerThe Registrar may refuse to register a topography if it appears to the Registrar, on the basis of any information or material contained in the application for registration, that the application was filed more than two years after the topography was first commercially exploited or that neither the condition set out in paragraph 4(1)(c) nor the condition set out in subsection 4(4) has been met.
Certificate of registrationThe Registrar shall issue a certificate of registration in respect of each topography registered under this Act.Contents of certificateA certificate of registration issued in respect of a topography shall include the filing date of the application for registration of the topography, the date of expiration of the exclusive right therein and such other particulars as may be prescribed.PresumptionsA certificate of registration issued in respect of a topography that purports to be signed by the Registrar is, without proof of the signature, admissible in any court as evidence of the facts therein alleged and is, in the absence of evidence to the contrary, proof thatthe topography was registrable under this Act at the time of the registration; andthe application for registration of the topography was correct in all material particulars and did not omit any material information.Correction of errorsThe Registrar may, for the purpose of correcting any typographical or clerical error in a certificate of registration, amend the certificate or issue a new certificate in substitution therefor.
Invalidity of registrationThe registration of a topography is invalid ifthe topography was not registrable under this Act at the time of the registration; orthe application for registration of the topography was incorrect in a material particular or omitted any material information, unless the incorrectness or omission occurred by mistake.
Registration of other particularsThe Registrar shall enter in the register particulars of any transfer of an interest or grant of a licence affecting a registered topography on being furnished with evidence of the transfer or grant that is satisfactory to the Registrar.Changes in informationThe Registrar may amend any entry in the register, or make new entries, for any of the following purposes:to reflect any change in the name or address of an owner of a registered topography;to reflect any change in a registered title of a topography or the use of a new title;to reflect any prescribed change of information; andto correct any typographical or clerical error.
Public inspectionSubject to the regulations, the register, applications for registration of topographies and material filed with the Registrar in relation to any registered topography shall be made available for public inspection during regular business hours.
Jurisdiction of Federal Court
Concurrent jurisdictionThe Federal Court has concurrent jurisdiction to hear and determineany action for the infringement of the exclusive right in a registered topography; andany question relating to the ownership of a topography or any right in a topography.
Exclusive jurisdictionThe Federal Court has exclusive original jurisdiction, on application of any interested person, to order that the registration of a topography or any other entry in the register be expunged or amended on the ground that the registration is invalid or that, at the date of the application, the entry as it appears does not accurately express or define the existing rights of any person appearing on the register as the owner of the topography.ApplicationAn application under subsection (1) may be made by the filing of an originating notice of motion, by counter-claim in an action for infringement or by statement of claim in an action claiming additional relief under this Act.Definition of “interested person”In subsection (1), interested person includes the Registrar, the Attorney General of Canada and persons who are affected or who reasonably apprehend that they may be affected by any entry in the register.
Registrar
Appointment of RegistrarThere shall be a Registrar of Topographies who shall be designated by the Minister from among persons employed in the Department of Industry.DutiesThe Registrar shall perform the duties assigned to the Registrar by this Act and such duties as may be assigned to the Registrar by the regulations or by the Minister.Acting RegistrarWhere the Registrar is absent or unable to act or the office of Registrar is vacant, the Minister may designate any other person employed in the Department of Industry to perform the duties and exercise the powers of the Registrar for the time being.
  • 1990, c. 37, s. 25;
  • 1992, c. 1, s. 145(F);
  • 1995, c. 1, s. 63.
Other Rights
Relationship to other lawExcept as provided in this Act, nothing in this Act shall affect any right granted by or under any other law.
Regulations
RegulationsThe Governor in Council may make regulationsgoverning the form of the register, including any indexes thereto, and the entries to be made therein;governing the filing of copies of documents in the register;governing public inspection of the register, of applications for registration of topographies and of material filed with the Registrar in relation to any registered topography;governing, restricting or prohibiting the making or providing of copies of applications for registration of topographies and of material filed with the Registrar in relation to any registered topography;assigning duties to the Registrar;prescribing fees, or the manner of determining the fees, to be paid for any act or service rendered by the Registrar;prescribing any other matter or thing that by this Act is to be or may be prescribed; andgenerally for carrying out the purposes and provisions of this Act.
Ministerial Review
Review of ActFive years after the coming into force of this Act, the Minister shall undertake a review of the provisions and operation of this Act.Report to ParliamentThe Minister shall, within one year after undertaking the review referred to in subsection (1), submit a report on the review to each House of Parliament.
CONSEQUENTIAL AMENDMENTS
[Amendments]
COMING INTO FORCE
Coming into forceThis Act shall come into force on a day to be fixed by order of the Governor in Council.[Note: Act in force May 1, 1993, see SI/93-68.]
RELATED PROVISIONS — 1994, c. 47, s. 131(2)