Tackle Regulations (C.R.C., c. 1494)

Regulations are current to 2014-08-05 and last amended on 2007-07-01. Previous Versions

  •  (1) Adequate hand grips shall be provided on portable hatch covers.

  • (2) Non-portable, removable hatch covers shall be provided with safe means for lifting them off and on.

  • (3) Hatch coverings of the hinged or folding type shall be fitted with a locking device or other means of preventing accidental closure.

  • (4) Locking devices for portable hatch beams shall be kept in good order.

 Working space around a hatch shall be not less than 915 mm wide, unless provision is made to enable workers to remove and replace hatch covers and beams in safety.

  • SOR/79-784, s. 6.
  •  (1) Where a worker is required to go outside of the rails or bulwarks to secure deck cargo or for any other purpose connected with the processes, means to ensure the safety of the worker shall be provided.

  • (2) Where deck cargo is stowed so close to the ship’s side and at such a height that the rails or bulwarks do not protect workers from falling overboard, means to enable the attachment of the derrick guys without the need for a worker to go outboard of the deck cargo shall be provided.

 Except in cases where the special design of the lifting machinery renders provision unnecessary, fixed derrick booms shall be fitted with suitable guy preventers which shall be secured to the head of the derrick boom independently of other fittings.

PART IV

[Repealed, SOR/2007-128, s. 402]

 [Repealed, SOR/2007-128, s. 402]

 [Repealed, SOR/2007-128, s. 402]

 [Repealed, SOR/2007-128, s. 402]

 [Repealed, SOR/2007-128, s. 402]

 [Repealed, SOR/2007-128, s. 402]

 [Repealed, SOR/2007-128, s. 402]

 [Repealed, SOR/2007-128, s. 402]

 [Repealed, SOR/2007-128, s. 402]

 [Repealed, SOR/2007-128, s. 402]