Consumer Packaging and Labelling Regulations (C.R.C., c. 417)

Regulations are current to 2017-11-20 and last amended on 2014-01-29. Previous Versions

  •  (1) The declaration of net quantity of non-perforated rolls, sheets or other units of wrapping paper, plastic foil, aluminum foil, waxed paper, wall paper, adhesive tape or other non-perforated bidimensional products shall show the net quantity of the product by

    • (a) the number of rolls, sheets or other units in the package, if there is more than one;

    • (b) the length and width of each roll, sheet or other unit; and

    • (c) the area measurement of the roll or the total area measurement of all sheets or other units if each roll, sheet or other unit is more than four inches (10.2 centimetres) in width and more than one square foot (9.29 square decimetres) in area.

  • (2) The declaration of net quantity of rolls, sheets or other units of bathroom tissue, facial tissue, paper towels, paper napkins and other bidimensional products that have one or more plys and are sold in separate or perforated individual units shall show the net quantity of the product by

    • (a) the number of rolls, sheets or other units in the package, if there is more than one;

    • (b) the length and width of each separate or perforated individual unit;

    • (c) the number of plys of each separate or perforated individual unit unless the product is one of a class of products that is made only in a single ply; and

    • (d) in the case of roll products, the number of perforated individual units in the roll.

  • (3) Where the package contains different bidimensional products, the net quantity of each such product shall be shown as required by this section.

Units of Measurement

 The declaration of net quantity in Canadian units for a measurement of volume less than one gallon shall be shown in fluid ounces, except that 20 fluid ounces may be shown as being one pint, 40 fluid ounces as being one quart, 60 fluid ounces as being three pints, 80 fluid ounces as being two quarts or 1/2 gallon and 120 fluid ounces as being three quarts.

 The declaration of net quantity in metric units shall be shown in the decimal system to three figures, except that where the net quantity is below 100 grams, millilitres, cubic centimetres, square centimetres or centimetres, it may be shown to two figures and, in either case, any final zero appearing to the right of the decimal point need not be shown.

 Where a net quantity less than a whole number is shown in the declaration of net quantity of a prepackaged product in a metric unit, it shall be shown

  • (a) in the decimal system with the numeral zero preceding the decimal point; or

  • (b) in words.

 Subject to section 27.1, where the declaration of net quantity of a prepackaged product is shown in metric units, the metric units shall be in

  • (a) millilitres, where the net volume of the product is less than 1 000 millilitres, except that 500 millilitres may be shown as being 0.5 litre;

  • (b) litres, where the net volume is 1 000 millilitres or more;

  • (c) grams, where the net weight is less than 1 000 grams, except that 500 grams may be shown as being 0.5 kilogram;

  • (d) kilograms, where the net weight is 1 000 grams or more;

  • (e) centimetres or millimetres, where the length is less than 100 centimetres;

  • (f) metres, where the length is 100 centimetres or more;

  • (g) square centimetres, where the area is less than 100 square centimetres;

  • (h) square decimetres, where the area is 100 square centimetres or more, but less than 100 square decimetres;

  • (i) square metres, where the area is one square metre or more;

  • (j) cubic centimetres, where the cubic measurement is less than 1 000 cubic centimetres;

  • (k) cubic decimetres, where the cubic measurement is one cubic decimetre or more but less than 1 000 cubic decimetres; and

  • (l) cubic metres, where the cubic measurement is one cubic metre or more.

  • SOR/80-840, s. 2.

 Notwithstanding paragraph 27(c), where the net weight of

  • (a) a prepackaged product that is packaged from bulk on a retail premises, or

  • (b) a prepackaged catch weight product that is sold by a retailer

is less than 1 000 grams and the declaration of net quantity is shown in terms of metric units of weight, the metric units may be shown in terms of grams or a decimal fraction of a kilogram.

  • SOR/80-840, s. 3.

Prepackaged Products Consisting of Products Packaged Separately

  •  (1) Where a prepackaged product is sold as one unit but consists of two or more products that are packaged separately and labelled with the information required to be shown on prepackaged products, the declaration of net quantity shall show

    • (a) the number of products in each class and the identity of each class in terms of common, generic or functional name;

    • (b) the total net quantity of products in each class in the unit or the individual net quantity of each identical product in the class in the unit; and

    • (c) if a class of product in the unit contains only one product, the net quantity of that product.

  • (2) Notwithstanding subsection (1), where a prepackaged product referred to in that subsection consists of less than seven identical products that are packaged separately and such products are labelled to show all the information required by the Act and these Regulations and that information is clearly visible at the time of sale, no information is required to be shown on the prepackaged product being sold as one unit and that prepackaged product is exempt from sections 4, 8 and 10 of the Act.

Advertisements

  •  (1) Subject to subsections (2) and (3), where the declaration of net quantity of a prepackaged product is in terms of metric and Canadian units, an advertisement for such product may show its net quantity in terms of either a metric or a Canadian unit of measurement.

  • (2) During the year 1980, Canadian units of measurement shall not be used in any advertisement within retail premises for a wallpaper or any “floor covering” within the meaning of section 342 of the Weights and Measures Regulations unless the equivalent metric units of measurement are shown in a manner at least as prominent as the Canadian units.

  • (3) After December 31, 1980, Canadian units of measurement shall not be used in any advertisement for a wallpaper or any “floor covering” within the meaning of section 342 of the Weights and Measures Regulations.

  • SOR/80-840, s. 4.

Name and other Information

 Where by any enactment of the Parliament of Canada or any regulation made pursuant thereto, a common, generic or functional name for a product is prescribed, that name shall be used as the common, generic or functional name of the prepackaged product for the purpose of subparagraph 10(b)(ii) of the Act.

  •  (1) Where any reference, direct or indirect, is made on a label to a place of manufacture and the reference is made with respect to the place of manufacture of the label or container and not to the place of manufacture of the product, the reference shall be accompanied by an additional statement indicating that the place of manufacture refers only to the label or container.

  • (2) Where a prepackaged product that is wholly manufactured or produced in a country other than Canada has applied to it, whether in Canada or elsewhere, a label that shows the identity and principal place of business of the person in Canada for whom the prepackaged product was manufactured or produced for resale, the identity and principal place of business of that person shall be preceded by the words “imported by” (“importé par”) or “imported for” (“importé pour”), as the case may be, unless the geographic origin of the prepackaged product is stated on the label.

  • (3) Where a product that is wholly manufactured or produced in a country other than Canada is packaged in Canada at other than the retail level of trade and the resulting prepackaged product has applied to it a label that shows the identity and principal place of business of either the person in Canada for whom the product was manufactured or produced for resale in prepackaged form or for whom the prepackaged product was manufactured or produced for resale, the identity and principal place of business of that person shall be preceded by the words “imported by” (“importé par”) or “imported for” (“importé pour”), as the case may be, unless the geographic origin of the product is stated on the label.

  • (4) Subject to the requirements of any other applicable federal or provincial law, the statement of geographic origin referred to in subsections (2) and (3) shall be located immediately adjacent to the declaration of dealer identity and principal place of business and shall be shown in letters at least as large as those used in the declaration of the Canadian dealer’s principal place of business.

  • (5) Subsections (2) and (4) do not apply to a prepackaged product labelled in Canada prior to November 1, 1982.

  • (6) Subsections (3) and (4) do not apply to a prepackaged product packaged and labelled in Canada prior to November 1, 1982.

  • (7) Subsection (4) does not apply to a prepackaged product manufactured or produced and labelled in a country other than Canada prior to November 1, 1982.

  • SOR/81-906, s. 1.
 
Date modified: