Government of Canada / Gouvernement du Canada
Symbol of the Government of Canada

Search

Weights and Measures Regulations

Version of section 39 from 2006-03-22 to 2014-07-31:

  •  (1) Where a trader acquires a measuring machine for use in trade that is part of a receiving or dispensing system installed on a vehicle, he shall make a report in writing to the nearest Measurement Canada office within five days from the date of the acquisition containing the following information:

    • (a) the name and address of the trader;

    • (b) the make, model and serial number of the machine;

    • (c) the range of flow rate or capacity of the machine;

    • (d) the make, fleet and unit number of the vehicle on which the machine is installed;

    • (e) the address, if known, at which the machine was located prior to the acquisition; and

    • (f) the new address at which the machine can be inspected.

  • (2) Where a trader who owns or holds in his possession for use in trade a machine described in subsection (1) changes the address at which the machine can be found for inspection, he shall, within five days after the date of changing the address, make a report in writing to the nearest Measurement Canada office containing the information required by paragraphs (1)(a), (b), (c), (d) and (f) and the address at which the machine could have been inspected prior to the change of address.

  • SOR/93-234, s. 2(F)
  • SOR/2005-297, s. 40

Date modified: