Government of Canada / Gouvernement du Canada
Symbol of the Government of Canada

Search

Weights and Measures Regulations

Version of section 41 from 2006-03-22 to 2014-07-31:

  •  (1) Where a person repairs a device that is or is to be used in trade without taking possession of it or adjusts or alters such a device, whether or not he takes possession of it, and the alteration, adjustment or repair is of a nature that may affect the accuracy of the device or may result in its no longer being of a class, type or design approved for use in trade, he shall, within five days after the date of the alteration, adjustment or repair, report the following information to the nearest Measurement Canada office:

    • (a) his name and address;

    • (b) the name and address of the person who has possession of the device;

    • (c) the address of the place where the device is located if that address is different from the address referred to in paragraph (b);

    • (d) the date of completion of the alteration, adjustment or repair;

    • (e) the make, model and serial number of the device;

    • (f) the range of flow rate or capacity of the device;

    • (g) a description of the alteration, adjustment or repair made;

    • (h) a description of the tests made after the alteration, adjustment or repair to determine the accuracy of the device, the results of such tests and the equipment used for such testing;

    • (i) [Repealed, SOR/81-623, s. 2]

    • (j) whether the person who made the alteration, adjustment or repair removed or broke or found removed or broken any marking, tag or seal placed on or attached to the device by an inspector or by a person who had previously altered, adjusted or repaired the device and, where possible, a description of such marking, tag or seal; and

    • (k) where the person who made the alteration, adjustment or repair removed or broke or found removed or broken any seal, whether he replaced it with another seal and, if so, a description of that seal and the number of the seal, if any.

  • (2) A report under subsection (1) shall be in writing, but an inspector may authorize the report to be made verbally, in which case the report shall be made verbally.

  • SOR/81-623, s. 2
  • SOR/2005-297, ss. 40, 41(F)

Date modified: