Asbestos Products Regulations (SOR/2007-260)

Regulations are current to 2013-04-29 and last amended on 2011-06-20. Previous Versions

Marginal note:Format of statement

6. The statement required by paragraphs 4(c) and 5(b) must be printed in bold-faced type that has the following minimum height:

  • (a) in the case of an asbestos product that is in a container whose main display panel area is set out in column 1 of the table to this section, the height set out in column 2;

  • (b) in the case of an asbestos product that is not in a container, that is rectangular or cylindrical in shape and whose main display panel area is set out in column 1 of the table to this section, the height set out in column 2; and

  • (c) in the case of an asbestos product that is not in a container and that is not rectangular or cylindrical in shape, 12 mm.

TABLE TO SECTION 6

MINIMUM HEIGHT OF TYPE

Column 1Column 2
ItemArea of the main display panelMinimum height of type (mm)
1.250 cm2 or less2
2.More than 250 cm2 but not more than 1 000 cm26
3.More than 1 000 cm2 but not more than 3 500 cm212
4.More than 3 500 cm224

REPEAL

7. [Repeal]

COMING INTO FORCE

Marginal note:Registration

8. These Regulations come into force on the day on which they are registered.