Allocation Method Order (2010) — Softwood Lumber Products (SOR/2009-320)

Regulations are current to 2017-10-13

Marginal note:Reserve pool

 The reserve pool is calculated in accordance with the formula

QQ × (TPPE/TEQ) × 4%

where

QQ
is the Quebec quantity;
TPPE
is the total volume of primary producers’ products that were exported from Quebec to the United States under export permits during the reference period, excluding the volume of products of primary producers who relinquish their export allocations for 2010; and
TEQ
is the total volume of primary producers’ and remanufacturers’ products that were exported from Quebec to the United States under export permits during the reference period, excluding the volume of products of primary producers and remanufacturers who relinquish their export allocations for 2010.
Marginal note:Residual non-allocated quantity

 The residual non-allocated quantity of the reserve pool is calculated in accordance with the formula

RP – AP

where

RP
is the reserve pool; and
AP
is the total volume of softwood lumber products allocated to primary producers calculated under section 8.
Marginal note:Allocation to remanufacturers

 The allocation of the Quebec quantity to a remanufacturer that is based on its historic export volume is calculated in accordance with the formula

QQ × (RE/TEQ)

where

QQ
is the Quebec quantity;
RE
is the volume of the remanufacturer’s products that were exported from Quebec to the United States under export permits during the reference period; and
TEQ
is the total volume of primary producers’ and remanufacturers’ products that were exported from Quebec to the United States under export permits during the reference period, excluding the volume of products of primary producers and remanufacturers who relinquish their export allocations for 2010.

Manitoba

Marginal note:Allocation

 The allocation of the Manitoba quantity to a primary producer or remanufacturer who applies for an export allocation is calculated in accordance with the formula

MQ × (EM/TEM)

where

MQ
is the Manitoba quantity;
EM
is the volume of the primary producer’s or remanufacturer’s products that were exported from Manitoba to the United States under export permits during the reference period; and
TEM
is the total volume of primary producers’ and remanufacturers’ products that were exported from Manitoba to the United States under export permits during the reference period, excluding the volume of products of primary producers and remanufacturers who relinquish their export allocations for 2010.

Saskatchewan

Marginal note:Allocation

 The allocation of the Saskatchewan quantity to a primary producer or remanufacturer who applies for an export allocation is calculated in accordance with the formula

SQ × (ES/TSQ)

where

SQ
is the Saskatchewan quantity;
ES
is the volume of the primary producer’s or remanufacturer’s products that were exported from Saskatchewan to the United States under export permits during the reference period; and
TSQ
is the total of the Saskatchewan quantities for the reference period.
Marginal note:Allocation of remainder

 The allocation of the remainder of the Saskatchewan quantity is based on the order of receipt of applications for an export allocation of the remainder, with each applicant receiving the volume applied for until the Saskatchewan quantity is fully allocated.

Coming into Force

Marginal note:Registration

 This Order comes into force on the day on which it is registered.

 
Date modified: