Government of Canada / Gouvernement du Canada
Symbol of the Government of Canada

Search

Toys Regulations

Version of section 32 from 2011-06-20 to 2016-06-21:


Marginal note:Flammability of outer covering

  •  (1) The outer covering of a doll, plush toy or soft toy that is made of flat or raised fibre textile material or natural fur must, when tested in accordance with Schedule 5, have a flame spread time of greater than 7 seconds.

  • Marginal note:Exception — pile of less than 51 mm

    (2) Subsection (1) does not apply to an outer covering whose exposed pile length is less than 51 mm (2 inches) and whose small size prevents the removal of material, including any seam, that is sufficient for at least one of the specimens required for the test set out in Schedule 5.

  • Marginal note:Exception — pile of 51 mm or more

    (3) Subsection (1) does not apply to an outer covering whose exposed pile length is 51 mm (2 inches) or more and whose small size prevents the removal of material, including any seam, that is sufficient for at least one of the specimens required for the test set out in Schedule 5. The outer covering must not flame on a one-second impingement of the calibrated flame applied by the flammability tester described in section 1 of Schedule 6 or must self-extinguish within 2 seconds of the removal of the flame, after being subjected to all of the following procedures:

    • (a) if it is known to have a flame-retarding finish or if preliminary testing indicates that such a finish may be present, it is laundered in accordance with section 5 of Schedule 7;

    • (b) it is dried in an oven for 30 minutes at 105°C (221°F) or for 120 minutes at 75°C (167°F);

    • (c) it is removed from the oven; and

    • (d) it is placed until cool in a desiccator over a desiccant such as anhydrous calcium chloride for at least 15 minutes and not more than two hours.


Date modified: