Electricity and Gas Inspection Regulations

Version of section 21 from 2006-03-22 to 2014-07-31:

  •  (1) A certificate issued pursuant to section 14 of the Act in respect of a meter shall be numbered for identification and shall contain the following particulars:

    • (a) the address or location at which the meter was verified or reverified;

    • (b) the date of the verification or reverification;

    • (c) the identification numbers of the meter;

    • (d) the name of the manufacturer of the meter;

    • (e) the class, type or design of the meter;

    • (f) the identification numbers of all measuring apparatus used in verifying or reverifying the meter;

    • (g) the name and address of the owner of the meter;

    • (h) the errors, if any, of the meter at all points tested;

    • (i) the name, in block letters, and the signature of the person issuing the certificate;

    • (j) whether the person signing the certificate is an inspector, an accredited meter verifier or a person, referred to in paragraph 10(a) of the Act, acting on behalf of an accredited meter verifier and, in the case of a person acting on behalf of an accredited meter verifier, the name of the accredited meter verifier on whose behalf that person is acting; and

    • (k) in the case of a gas meter, whether it is converting or non-converting for temperature or pressure, or both.

  • (2) Where the verification or reverification of a meter has been done by statistical means on the basis of sampling, the certificate issued pursuant to section 14 of the Act shall include, in addition to the information required by subsection (1), an identification or listing of

    • (a) the parent group or lot; and

    • (b) the meters tested.

  • SOR/95-532, s. 3.
Date modified: