Hazardous Products (Expansion Gates and Expandable Enclosures) Regulations (SOR/90-39)

Regulations are current to 2012-05-14 and last amended on 2011-06-20. Previous Versions

SCHEDULE II

(Subsection 5(1))

SMALL PARTS CYLINDER

A small parts cylinder of the design and dimensions shown in Figure 1 shall be used for the purpose of measuring components referred to in subsection 5(1).

FIGURE 1

Illustration depicting measurements for a small parts cylinder. The small parts cylinder is a hollow cylinder with an inner diameter of 31.7 mm. A plate (or similar device) is placed inside the cylinder at a 45 degree angle such that the minimum depth of the cylinder is 25.4 mm and the maximum depth of the cylinder is 57.1 mm. No specifications are provided for the wall or floor thickness of the cylinder.
  • SOR/2004-65, s. 15.