Basic Search

 
Display / Hide Categories
3 results
Didn't find what you're looking for?
Search all Government of Canada websites

  1. Toys Regulations - SOR/2011-17 (SCHEDULE 7 : Test Method for Dolls, Plush Toys and Soft Toys That Are Made of or Covered with Spun Staple Yarn or Bulked Continuous Filament Yarn)

    [...]

    [...]

    • [...]

    • (2) Prepare a bath solution that consists of water that has a hardness of not greater than 324 mg (5 grains) of calcium carbonate per 4.5 L (1.0 imperial gallons) in an amount 30 times the weight of the sample and a commercially available detergent in an amount equal to 15% of this weight. Ensure that the temperature of the bath solution is from 35°C to 38°C inclusive (95°F to 100°F).

    • [...]

    • (4) Rinse the sample three times in water that has a hardness not greater than 324 mg (5 grains) of calcium carbonate per 4.5 L (1.0 imperial gallons) in an amount 30 times the weight of the sample. Ensure that the temperature of the rinse water is 27°C (80°F). Immerse and gently squeeze the sample in the first rinsing bath for 1 minute and in the second and third baths for 2 minutes each.

    • [...]

    • (6) Lay the sample flat to dry at ambient temperature, namely, from 18°C to 24°C inclusive (65°F to 75°F).

    [...]

    • [...]

    • (4) Close the door of the flammability tester. Set the stop watch to zero. Conduct the test in a draft-free room with the flammability tester at room temperature.

    [...]


  2. Toys Regulations - SOR/2011-17 (SCHEDULE 5 : Test Method for Dolls, Plush Toys and Soft Toys That Are Covered with a Flat or Raised Fibre Textile Material or Natural Fur)

    [...]

    [...]

    • [...]

    • (2) Prepare a bath solution that consists of water that has a hardness of not greater than 324 mg (5 grains) of calcium carbonate per 4.5 L (1.0 imperial gallons) in an amount 30 times the weight of the sample from which the specimens are to be taken and a commercially available detergent in an amount equal to 15% of this weight. Ensure that the temperature of the bath solution is from 35°C to 38°C inclusive (95°F to 100°F).

    • [...]

    • (4) Rinse the sample three times in water that has a hardness of not greater than 324 mg (5 grains) of calcium carbonate per 4.5 L (1.0 imperial gallons) in an amount 30 times the weight of the sample. Ensure that the temperature of the rinse water is 27°C (80°F). Immerse and gently squeeze the sample in the first rinsing bath for 1 minute and in the second and third baths for 2 minutes each.

    • [...]

    • (6) Lay the sample flat to dry at ambient temperature, namely, from 18°C to 24°C inclusive (65°F to 75°F).

    [...]

    • [...]

    • (4) Close the door of the flammability tester. Set the stop watch to zero. Conduct the test in a draft-free room with the flammability tester at room temperature.

    [...]


  3. Toys Regulations - SOR/2011-17 (SCHEDULE 9 : Test Method for Integrity of Magnetic Toys and Magnetic Components)

    [...]

    1 The following method is to be used for testing the integrity of magnetic toys and magnetic components:

    • (a) in the case of a magnetic toy or magnetic component that is made of wood, that is intended to be used in water or that is brought into contact with the user’s mouth in order to be used, begin by completing the following steps:

      • (i) submerge it for four minutes in a container of demineralized water that is maintained at a temperature of 21 ± 5°C,

      • [...]

      • (iii) maintain it at a temperature of 21 ± 5°C for 10 minutes,

    [...]



Date modified: