His Excellency the Governor General in Council, on the recommendation of the Minister of Health, pursuant to section 37a of the Canada Consumer Product Safety Actb, makes the annexed Children’s Jewellery Regulations.S.C. 2016, c. 9, s. 67S.C. 2010, c. 21InterpretationDefinitionsThe following definitions apply in these Regulations.children’s jewellery means jewellery that is manufactured, sized, decorated, packaged, advertised or sold in a manner that appeals primarily to children under 15 years of age but does not include merit badges, medals for achievement or other similar objects normally worn only occasionally. (bijoux pour enfants)good laboratory practices means practices that are in accordance with the principles set out in the Organisation for Economic Co-operation and Development document entitled OECD Principles of Good Laboratory Practice, Number 1 of the OECD Series on Principles of Good Laboratory Practice and Compliance Monitoring, ENV/MC/CHEM(98)17, the English version of which is dated January 21, 1998 and the French version of which is dated March 6, 1998. (bonnes pratiques de laboratoire)RequirementsLead contentChildren’s jewellery, when tested using good laboratory practices, must not contain more than 90 mg/kg of lead.Cadmium contentChildren’s jewellery, when tested using good laboratory practices, must not contain more than 130 mg/kg of cadmium if the jewellery item is small enough to be totally enclosed in the small parts cylinder illustrated in the schedule when a force of not more than 4.45 N is applied.RepealThe Children’s Jewellery Regulations1 are repealed.SOR/2016-168Coming into ForceSix months after publicationThese Regulations come into force on the day that, in the sixth month after the month in which they are published in the Canada Gazette, Part II, has the same calendar number as the day on which they are published or, if that sixth month has no day with that number, the last day of that sixth month.[Note: Regulations in force November 2, 2018.](Section 3)Small Parts CylinderA sectional view of the small parts cylinder which is a hollow cylinder with an inner diameter of 31.7 mm. The inner base of the cylinder is diagonal at a 45° angle so that the minimum depth of the cylinder is 25.4 mm and the maximum depth of the cylinder is 57.1 mm.