Off-Road Compression-Ignition Engine Emission Regulations
17 (1) In the case of an engine other than one referred to in subsection 14(1), evidence of conformity for the purposes of paragraph 153(1)(b) of the Act in respect of a company shall consist of the following:
(a) with respect to a transition engine referred to in section 13 that is installed or will be installed in or on a machine of a model of which at least one machine is sold concurrently in Canada and in the United States,
(i) in the case of a transition engine referred to in paragraph 13(1)(a),
(A) a statement, dated and signed by the company or its duly authorized representative, certifying that the engine conforms to section 625(e), subpart G, of CFR 1039,
(B) a document demonstrating that at least one machine of the same model as the one in which the engine will be installed is sold concurrently in Canada and in the United States,
(C) a copy of the documentation submitted to the EPA under section 625, subpart G, of CFR 1039, and
(D) a copy of the label referred to in subsection 13(3) or (4), if applicable,
(ii) in the case of a transition engine referred to in paragraph 13(1)(b),
(A) a statement, dated and signed by the company or its duly authorized representative, certifying that the engine conforms to section 625(e), subpart G, of CFR 1039,
(B) a document demonstrating that at least one machine of the same model as the one in which the engine is installed is sold concurrently in Canada and in the United States,
(C) a copy of the documentation submitted to the EPA under section 625, subpart G, of CFR 1039, and
(D) a copy of the label referred to in subsection 13(3) or (4), if applicable;
(b) with respect to an engine other than one referred to in paragraph (a), evidence of conformity shall be obtained and produced by a company in a form and manner that is satisfactory to the Minister and shall include a copy of the label referred to in section 10.1, 11.1, 12 or 13, as the case may be.
(2) For greater certainty, the company shall submit the evidence of conformity referred to in paragraph (1)(b) to the Minister before importing an engine or applying a national emissions mark to it.
- SOR/2011-261, s. 19
- Date modified: