Marine Personnel Regulations (SOR/2007-115)
Full Document:
- HTMLFull Document: Marine Personnel Regulations (Accessibility Buttons available) |
- XMLFull Document: Marine Personnel Regulations [833 KB] |
- PDFFull Document: Marine Personnel Regulations [1590 KB]
Regulations are current to 2025-12-10 and last amended on 2023-12-20. Previous Versions
146 (1) An applicant for a Third-class Engineer, Motor Ship or Steamship certificate who holds a Fourth-class Engineer certificate with STCW endorsement for the same type of vessel to which the certificate sought relates shall meet the requirements set out in column 1 of the table to this subsection and the corresponding specifications set out in column 2.
TABLE
Item Column 1 Column 2 Requirements Specifications 1 Hold a certificate Fourth-class Engineer certificate with STCW endorsement. 2 Experience After having acquired the qualifying service required for a Fourth-class Engineer, Motor Ship or Steamship certificate, acquire at least 12 months of qualifying service as follows:
(a) at least 6 months of sea service as engineer in charge of the engineering watch or in charge of the machinery on one or more of the following vessels that have a propulsive power of at least 500 kW:
(i) a motor vessel other than a stationary MOU, in the case of an applicant for a motor ship certificate, or
(ii) on a steamship, in the case of an applicant for a steamship certificate;
(b) up to 3 months of qualifying service in respect of attendance at a program or course, other than an approved training course, at a maximum rate of one day of service for every three days of attendance, if
(i) the program or course substantially covers the subject-matter of at least one of the examinations referred to in item 4, and
(ii) the applicant provides a testimonial indicating that the applicant has successfully completed that program or course; and
(c) any remaining time in a combination of the following types of service on one or more of the following vessels that have a power of at least 500 kW:
(i) up to 3 months as an engineer on day work on board a vessel,
(ii) up to 3 months of qualifying service in respect of time spent in laying up, fitting out or refitting as an engineer on board a vessel to be credited at a maximum rate of one day of qualifying service for each calendar day of at least 8 hours of work,
(iii) service as an engineer on board a vessel without a propulsion system that is a motor or steam dredge, an MOU, a floating elevator or a similar vessel, to be credited at a rate of one-half the time served counting as qualifying service, and
(iv) service as an engine-room rating performing watchkeeping duties in an engine room on board a motor vessel or steamship, to be credited at a rate of one-third the time served counting as qualifying service.
3 Certificates to be provided to the examiner (a) MED with respect to STCW basic safety;
(b) MED training with respect to proficiency in survival craft and rescue boats other than fast rescue boats;
(c) MED in advanced fire fighting;
(d) MED for senior officers;
(e) marine advanced first aid; and
(f) ship watchkeeping practices taught using a propulsive plant simulator.
4 Pass examinations (a) The following written examinations at the third-class engineer level, after obtaining a Fourth-class Engineer certificate:
(i) applied mechanics,
(ii) thermodynamics,
(iii) electrotechnology, and
(iv) applied mathematics;
(b) an examination on ship watchkeeping practices using a propulsive plant simulator, after providing the certificate referred to in paragraph 3(f);
(c) written examination on general engineering knowledge at the third-class level, after meeting the requirements of items 2 and 3 and paragraphs (a) and (b);
(d) one of the following written examinations at the third-class level, after meeting the requirements of paragraph (c):
(i) engineering knowledge of motor vessels, in the case of an applicant for a Third-class Engineer, Motor Ship certificate, or
(ii) engineering knowledge of steamships, in the case of an applicant for a Third-class Engineer, Steamship certificate; and
(e) oral examination on the knowledge set out in paragraphs (a) to (d) and a knowledge of the legislation relevant to the certificate sought, after passing the examination referred to in paragraph (d).
(2) An applicant for a Third-class Engineer, Motor Ship certificate who holds a First-class, Second-class or Third-class Engineer, Steamship certificate shall
(a) after obtaining a Fourth-class Engineer, Motor Ship or Steamship certificate, acquire at least 6 months of service as an engineer on one or more motor vessels that have a propulsive power of at least 500 kW other than stationary MOUs; and
(b) pass a written and an oral examination to determine whether they have the engineering knowledge required by subparagraph 4(d)(i) of the table to subsection (1).
(3) An applicant for a Third-class Engineer, Steamship certificate who holds a First-class, Second-class or Third-class Engineer, Motor Ship certificate shall
(a) after obtaining a Fourth-class Engineer, Motor Ship or Steamship certificate, acquire at least 6 months of service as an engineer on one or more steamships that have a propulsive power of at least 500 kW; and
(b) pass a written and an oral examination to determine whether they have the engineering knowledge required by subparagraph 4(d)(ii) of the table to subsection (1).
Page Details
- Date modified: