Language selection

Government of Canada

Search

Biocides Regulations (SOR/2024-110)

Full Document:  

Regulations are current to 2025-09-29 and last amended on 2025-05-31. Previous Versions

Marginal note:Definitions

  •  (1) The following definitions apply in these Regulations.

    Act

    Act means the Food and Drugs Act. (Loi)

    active ingredient

    active ingredient means a component of a biocide that is directly responsible for any of the biocide’s intended effects. (ingrédient actif)

    biocide

    biocide means a drug that is manufactured, sold or represented for use in destroying or inactivating micro-organisms, or in reducing or controlling their number, on a non-living and non-liquid surface, but it does not include

    • (a) such a drug that is manufactured, sold or represented for use exclusively on the surface of food;

    • (b) such a drug that is manufactured, sold or represented for use on the surface of a contact lens that is a medical device, as defined in section 1 of the Medical Devices Regulations; or

    • (c) such a drug that

      • (i) is manufactured, sold or represented for use on the surface of

        • (A) an invasive device, as defined in section 1 of the Medical Devices Regulations, or

        • (B) a medical device, as defined in section 1 of the Medical Devices Regulations, that is not an invasive device, as defined in that section, but is intended to channel or store gases, liquids, tissues or body fluids, for the purpose of being introduced into the body by infusion or other means of administration, and

      • (ii) is capable of destroying or irreversibly inactivating either

        • (A) all types of pathogenic micro-organisms, but not necessarily large numbers of pathogenic bacterial spores, or

        • (B) all types of micro-organisms. (biocide)

    CAS registry number

    CAS registry number means the identification number that is assigned to a chemical substance by the Chemical Abstracts Service division of the American Chemical Society. (numéro d’enregistrement CAS)

    conditions of use

    conditions of use, in respect of a biocide, means

    • (a) its intended uses or purposes;

    • (b) the settings in which it is intended to be used;

    • (c) its risk information;

    • (d) its directions for use; and

    • (e) its directions for storage. (conditions d’utilisation)

    contact information

    contact information includes civic address, except in paragraphs 32(1)(e), 49(2)(d) and 50(1)(a). (coordonnées)

    expiry date

    expiry date, in respect of a biocide, means the year and month in which its shelf life ends. (date limite d’utilisation)

    foreign regulatory authority

    foreign regulatory authority means a government agency or other entity outside Canada that controls the manufacture, sale or use of biocides within its jurisdiction and that may take enforcement action to ensure that biocides marketed within its jurisdiction comply with the applicable legal requirements. (autorité réglementaire étrangère)

    formulant

    formulant means any component of a biocide other than an active ingredient or contaminant. (formulant)

    import

    import means import for the purpose of sale. (importer)

    List of Foreign Regulatory Authorities

    List of Foreign Regulatory Authorities means the document entitled List of Foreign Regulatory Authorities for Biocides that is published by the Government of Canada on its website, as amended from time to time. (Liste des autorités réglementaires étrangères)

    lot number

    lot number means any combination of letters, figures or both by which a biocide can be traced in manufacture and identified in distribution. (numéro de lot)

    major change

    major change means a change, other than a change referred to in section 14, that relates to the information or material provided to the Minister in connection with a biocide and that may reasonably be expected to have a major impact on the quality of the biocide, the benefits or risks associated with the biocide or the uncertainties related to the benefits and risks, including

    • (a) a change to a method of application, unless the changed method is similar to an approved method of application for the biocide;

    • (b) the addition of a method of application, unless the new method is similar to an approved method of application for the biocide;

    • (c) the addition of a formulant, unless the formulant is replacing a similar formulant in a similar quantity in a given quantity of the biocide;

    • (d) the removal of a formulant, unless the formulant is being replaced by a similar formulant in a similar quantity in a given quantity of the biocide;

    • (e) a change to the quantity of a formulant that a given quantity of the biocide contains; and

    • (f) a change to the conditions of use of the biocide, other than

      • (i) the removal of an intended use or purpose,

      • (ii) the removal of a setting in which the biocide is intended to be used,

      • (iii) the addition of risk information,

      • (iv) a change to or the addition or removal of a direction for use, if the change, addition or removal does not require an update to the information on the biocide’s safety or effectiveness that was provided to the Minister, or

      • (v) the removal of a direction for use that is due to the removal of a method of application or a change to the biocide’s intended use or purpose. (changement majeur)

    master formula

    master formula, in respect of a biocide, means a document that sets out

    • (a) the ingredients that are used in the manufacture of the biocide and the quantities of those ingredients that are required to manufacture a given quantity of the biocide;

    • (b) the specifications for the biocide;

    • (c) a detailed description of the procedures required to manufacture, package, label and store the biocide, including safety precautions and in-process controls;

    • (d) a detailed description of the methods used to test and examine the packaging material; and

    • (e) a statement of tolerances for the properties and qualities of the packaging material. (formule type)

    minor change

    minor change means a change that relates to the information or material provided to the Minister in connection with a biocide and that may reasonably be expected to have a minor impact on the quality of the biocide, the benefits or risks associated with the biocide or the uncertainties related to the benefits and risks, including

    • (a) a change to the name or contact information of the holder of the market authorization for the biocide;

    • (b) a change to the biocide’s brand names;

    • (c) the removal of a method of application;

    • (d) the replacement of a formulant with a similar formulant in a similar quantity in a given quantity of the biocide;

    • (e) a change referred to in any of subparagraphs (f)(i) to (v) of the definition major change;

    • (f) the addition, replacement or removal of an importer of the biocide or a person that manufactures the biocide or a change to the name or contact information of such an importer or person; and

    • (g) a change in the location where the biocide is manufactured. (changement mineur)

    pest control product

    pest control product has the same meaning as in subsection 2(1) of the Pest Control Products Act. (produit antiparasitaire)

    shelf life

    shelf life means the period, beginning on the day on which a biocide is packaged for sale to consumers, during which the biocide will, when stored appropriately, retain without any appreciable deterioration its stability and any other qualities claimed for it by the holder of the market authorization for it. (durée de conservation)

    specifications

    specifications, in respect of a biocide, means

    • (a) a statement of its properties and qualities, and of the properties and qualities of its active ingredients and formulants, including the identity, potency and purity of the biocide and those ingredients and formulants;

    • (b) the net quantity of the biocide in the package, the type of its package and a statement of the properties and qualities of the packaging material;

    • (c) a detailed description of the methods used to test and examine the biocide and its active ingredients and formulants; and

    • (d) a statement of tolerances for the properties and qualities of the biocide and for the properties and qualities of its active ingredients and formulants. (spécifications)

  • Marginal note:Definition of serious adverse drug reaction

    (2) For the purposes of section 21.8 of the Act as it relates to biocides, serious adverse drug reaction means a response to a biocide that, in respect of human health,

    • (a) results in in-patient hospitalization, prolongation of existing hospitalization, congenital malformation or chronic or significant disability or incapacity; or

    • (b) is life-threatening or results in death.

Page Details

Date modified: