Government of Canada / Gouvernement du Canada
Symbol of the Government of Canada

Search

Inuvik Airport Zoning Regulations (SOR/81-707)

Regulations are current to 2024-08-18

SCHEDULE(ss. 2 and 3)

PART IDescription of the Airport Reference Point

The airport reference point is a point coincidental with coordinate control survey monument No. 139302 (c.c.m. 32), located at latitude 68°18′18.7789″, longitude 133°29′05.2246″.

PART IIDescription of the Outer Limits of Land

The following described boundaries are the outer limits of lands:

COMMENCING at a point in the southern boundary of Lot 3, Group 1355, Plan 43574 (C.L.S.R.) 218 (L.T.O.), where it is intersected by the circumference of a circle having a radius of 4 000 m and centered at the airport reference point as described in Part I of the schedule; THENCE, in a southwesterly direction following the circumference of the said circle clockwise to the point where it intersects the northern boundary of Lot 3, Group 1355, Plan 43574 (C.L.S.R.) 218 (L.T.O.); as said outer limits are shown on Department of Transport Inuvik Airport Zoning Plan No. E.1552.

PART IIIDescription of the Approach Surfaces

The approach surfaces, shown on Department of Transport Inuvik Airport Zoning Plan No. E.1552, are surfaces abutting each end of the strip associated with the runway designated 04-22 and are described as follows:

  • (a) a surface abutting the end of the strip associated with runway approach 04, and

  • (b) a surface abutting the end of the strip associated with runway approach 22,

consisting of an inclined plane having a ratio of 1 m measured vertically to 50 m measured horizontally rising to an imaginary horizontal line drawn at right angles to the projected centre line of the strip, 300 m measured vertically above the elevation at the end of the strip, 15 000 m measured horizontally from the end of the strip, the outer ends of the imaginary horizontal line being 2 400 m from the projected centre line.

PART IVDescription of the Outer Surface

The outer surface, shown on Department of Transport Inuvik Airport Zoning Plan No. E.1552, is an imaginary surface located at a common plane established at a constant elevation of 45 m above the assigned elevation of the airport reference point, except where the common plane is less than 9 m above the surface of the ground, the imaginary surface is located 9 m above the surface of the ground.

PART VDescription of the Strip

The strip, shown on Department of Transport Inuvik Airport Zoning Plan No. E.1552, is described as follows:

the strip associated with runway 04-22 is 300 m in width, 150 m being on each side of the centre line of the runway and 1 948.8 m in length.

PART VIDescription of Each Transitional Surface

Each transitional surface, shown on Department of Transport Inuvik Airport Zoning Plan No. E.1552, is a surface consisting of an inclined plane having a ratio of 1 m measured vertically to 7 m measured horizontally at right angles to the centre line and centre line produced of the strip and extending upward and outward from the lateral limits of the strip and its approach surfaces to an intersection with the outer surface.


Date modified: