Declarations Regulations (Chemical Weapons Convention) (SOR/2010-56)
Full Document:
- HTMLFull Document: Declarations Regulations (Chemical Weapons Convention) (Accessibility Buttons available) |
- XMLFull Document: Declarations Regulations (Chemical Weapons Convention) [65 KB] |
- PDFFull Document: Declarations Regulations (Chemical Weapons Convention) [239 KB]
Regulations are current to 2026-09-30
Marginal note:Declaration
16 Unless the information has already been submitted to the National Authority, any person that, during a calendar year that falls within the period beginning on January 1, 1996 and ending at the end of the calendar year before the coming into force of these Regulations, produced a Schedule 3 chemical at a plant site must make, within 90 days after the day on which these Regulations come into force, an initial declaration to the National Authority that is signed and dated by the declarant or, in the case of a corporation, by its authorized representative and that contains, for each calendar year referred to in this section during which such production took place, the following information:
(a) the name and contact information of the declarant;
(b) if applicable, the name, position and contact information of the authorized representative;
(c) for each plant site,
(i) its name, address and precise location,
(ii) the name of its owner or of the corporation or enterprise operating it, as the case may be, and
(iii) if applicable, the number of plants within the plant site that are referred to in a declaration made under Part 3;
(d) for each plant referred to in section 15 that is located within the plant site,
(i) its name, precise location within the plant site and, if applicable, the name or number of the building or structure in which it is located,
(ii) the name of its owner or of the corporation or enterprise operating it, as the case may be, and
(iii) the main activities that are carried out; and
(e) for each Schedule 3 chemical referred to in section 15 that is produced in a quantity above the threshold set out in that section,
(i) its IUPAC name and CAS registry number or, if no CAS registry number has been assigned, its structural formula,
(ii) the total quantity produced, expressed in tonnes, and
(iii) the purposes for which it was produced.
Page Details
- Date modified: