Weights and Measures Regulations

39 (1) Where a trader acquires a measuring machine for use in trade that is part of a receiving or dispensing system installed on a vehicle, he shall make a report in writing to the nearest Measurement Canada office within five days from the date of the acquisition containing the following information:

• (a) the name and address of the trader;

• (b) the make, model and serial number of the machine;

• (c) the range of flow rate or capacity of the machine;

• (d) the make, fleet and unit number of the vehicle on which the machine is installed;

• (e) the address, if known, at which the machine was located prior to the acquisition; and

• (f) the new address at which the machine can be examined.

(2) If a trader who owns or has in their possession for use in trade a measuring machine described in subsection (1) changes the address at which the machine can be examined, they shall, within five days after the date of changing the address, make a report in writing to the nearest Measurement Canada office containing the information required by paragraphs (1)(a), (b), (c), (d) and (f) and the address at which the machine could have been examined before the change of address.