Ozone-depleting Substances and Halocarbon Alternatives Regulations

Marginal note:Calculation of manufacturing allowance

• 60 (1) The annual manufacturing allowance for an HCFC set out in Table 3 of Schedule 1 to which each person is entitled is determined as follows:

  • (a) for each calendar year that falls within the period that begins on January 1, 2015 and ends on December 31, 2019, in accordance with the following formula:

    A × B / C

    where

    A

    is 81.9 ODP tonnes,

    B

    is the quantity manufactured by a person for 2013, expressed in ODP tonnes, and

    C

    is the quantity manufactured in Canada, expressed in ODP tonnes; and

  • (b) for each calendar year that falls within the period that begins on January 1, 2020 and ends on December 31, 2029, by multiplying the manufacturing allowance granted for 2019 by 5%.

• Marginal note:Greater manufacturing allowance

  (2) When it is necessary to allow Canada to fulfill its obligations under an agreement with a Party for the purpose of industrial rationalization or to satisfy domestic HCFC needs, the Minister may permit, for a calendar year, a greater manufacturing allowance than that which a person would have obtained under subsection (1) and that greater manufacturing allowance is not taken into account in any subsequent calculation of the annual manufacturing allowance.

• Marginal note:Written notice

  (3) The Minister must inform the person in writing of their manufacturing allowance.