Government of Canada / Gouvernement du Canada
Symbol of the Government of Canada

Search

Energy Efficiency Regulations, 2016

Version of section 451 from 2019-04-30 to 2023-06-20:


Marginal note:Energy efficiency standards

  •  (1) The energy efficiency standards set out in column 3 of the table to this section apply to fluorescent lamp ballasts described in column 1 that are manufactured during the periods described in column 4.

  • Marginal note:Testing standard

    (2) A fluorescent lamp ballast complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 2 that are applicable to a fluorescent lamp ballast as defined in section 449.

    TABLE

    Column 1Column 2Column 3Column 4
    ItemEnergy-using ProductStandardEnergy Efficiency StandardPeriod of Manufacture
    1Fluorescent lamp ballastsCSA C654-10

    CSA C654-10, clause 4 for power factor

    CSA C654-10, Table 2 for ballast efficacy factor

    On or after February 3, 1995 and before November 14, 2014
    2Fluorescent lamp ballasts, other than T12 dimming ballastsCSA C654-14

    CSA C654-14, clause 4 for power factor

    CSA C654-14, clause 5.2 for ballast luminous efficiency

    On or after November 14, 2014
    3T12 dimming ballasts that are low-frequency and designed to operate one F34T12 lampCSA C654-14

    CSA C654-14, clause 4 for power factor

    Must have ballast luminous efficiency that is ≥ that specified for ballast in table to 10 C.F.R. §430.32(m)(2)(ii)(B)

    On or after November 14, 2014
    4T12 dimming ballasts that are high-frequency and designed to operate one F34T12 lampCSA C654-14

    CSA C654-14, clause 4 for power factor

    Must have ballast luminous efficiency that is ≥ that specified for ballast in table to 10 C.F.R. §430.32(m)(2)(ii)(B)

    On or after November 14, 2014
    5T12 dimming ballasts that are low-frequency and designed to operate two F34T12 lampsCSA C654-14

    CSA C654-14, clause 4 for power factor

    Must have ballast luminous efficiency that is ≥ that specified for ballast in table to 10 C.F.R. §430.32(m)(2)(ii)(B)

    On or after November 14, 2014
    6T12 dimming ballasts that are high-frequency and designed to operate two F34T12 lampsCSA C654-14

    CSA C654-14, clause 4 for power factor

    Must have ballast luminous efficiency that is ≥ that specified for ballast in table to 10 C.F.R. §430.32(m)(2)(ii)(B)

    On or after November 14, 2014
    7T12 dimming ballasts that are low-frequency and designed to operate two F96T12/ES lampsCSA C654-14

    CSA C654-14, clause 4 for power factor

    Must have ballast luminous efficiency that is ≥ that specified for ballast in table to 10 C.F.R. §430.32(m)(2)(ii)(B)

    On or after November 14, 2014
    8T12 dimming ballasts that are high-frequency and designed to operate two F96T12/ES lampsCSA C654-14

    CSA C654-14, clause 4 for power factor

    Must have ballast luminous efficiency that is ≥ that specified for ballast in table to 10 C.F.R. §430.32(m)(2)(ii)(B)

    On or after November 14, 2014
    9T12 dimming ballasts that are low-frequency and designed to operate two F96T12HO/ES lampsCSA C654-14

    CSA C654-14, clause 4 for power factor

    Must have ballast luminous efficiency that is ≥ that specified for ballast in table to 10 C.F.R. §430.32(m)(2)(ii)(B)

    On or after November 14, 2014
    10T12 dimming ballasts that are high-frequency and designed to operate two F96T12HO/ES lampsCSA C654-14

    CSA C654-14, clause 4 for power factor

    Must have ballast luminous efficiency that is ≥ that specified for ballast in table to 10 C.F.R. §430.32(m)(2)(ii)(B)

    On or after November 14, 2014
  • SOR/2018-201, s. 49

Date modified: