Energy Efficiency Regulations, 2016

Version of section 752 from 2019-04-30 to 2023-06-20:

Marginal note:Information

752 For the purpose of subsection 5(1) of the Act, the following information must be provided to the Minister in respect of an electric motor:

(a) in respect of an electric motor for which a unique motor identifier was not provided under paragraph 5(1)(c),
- (i) its nominal output power, expressed in kilowatts (horsepower),
- (ii) the number of poles, and
- (iii) its construction — namely, open construction or enclosed construction; and
(b) in respect of an electric motor described in column 1 of the table to this section, the information set out in column 3, which must be collected in accordance with the standard set out in column 2.

TABLE

Item	Energy-using Product	Standard	Information
	Column 1	Column 2	Column 3
1	Electric motors manufactured on or after February 3, 1995 and before June 1, 2016	CSA C390-10	(a) nominal efficiency value; (b) NEMA or IEC design of motor; (c) frame type; (d) motor configuration, namely, close-coupled pump motor, vertically mounted solid shaft normal thrust motor, fire-pump motor or motor that is part of an integral gear assembly; (e) shaft type; (f) mounting type; and (g) motor configuration, namely, footless, with feet or with detachable feet.
2	Electric motors manufactured on or after June 1, 2016	CSA C390-10 or IEEE 112-2004	(a) nominal efficiency value; (b) NEMA or IEC design of motor; and (c) motor configuration, namely, fire-pump motor, medical-imaging motor or another configuration.

Language selection