On-Road Vehicle and Engine Emission Regulations

Version of section 32.7 from 2014-01-01 to 2018-11-15:

  •  (1) A company shall submit to the Minister an end of model year report, signed by a person who is authorized to act on behalf of the company, no later than May 1 after the end of each model year.

  • (2) A company shall include the following in its end of model year report:

    • (a) a statement that each Class I, II or III motorcycle, as the case may be, imported or manufactured in Canada, for sale in Canada, conforms to the applicable standards referred to in paragraph 17(a) or section 17.1, 19, 19.1 or 32.2;

    • (b) in respect of each subfleet, a statement that

      • (i) each motorcycle in the subfleet meets all of the criteria set out in paragraph 32.2(3)(a), or

      • (ii) the subfleet contains motorcycles that do not meet all of the criteria set out in paragraph 32.2(3)(a) but the subfleet or the group of motorcycles referred to in subparagraph 32.2(3)(b)(ii) conforms to the emissions averaging requirements set out in paragraph 32.2(3)(b); and

    • (c) for each class, the total number of motorcycles and their model.

  • (3) In a model year during which any of the company’s subfleets includes one or more motorcycles that conform to a family emission limit that is greater than the applicable HC+NOx emission standard set out in the section of the CFR that is referred to in paragraph 17(a) or subsection 17.1(2) or the fuel tank permeation emission standard set out that section, the end of model year report shall contain the following information in respect of each subfleet:

    • (a) the applicable HC+NOx emission standard and the fuel tank permeation emission standard;

    • (b) the average HC+NOx value and the average fuel tank permeation value;

    • (c) for each model of motorcycle, the values used in calculating the average HC+NOx value and the average fuel tank permeation value;

    • (d) the total number of motorcycles in the subfleet;

    • (e) the HC+NOx emission credits, if any, in that model year; and

    • (f) the HC+NOx emission deficits, if any, in that model year.

  • (4) If the company’s end of model year report contains the statement referred to in subparagraph (2)(b)(ii) in respect of a group of motorcycles, the report shall also contain the information required under paragraphs (3)(a) to (d), with any necessary modifications, with respect to the group of motorcycles described in subparagraph 32.2(3)(b)(ii).

  • (5) A company that avails itself of an exemption referred to in section 17.1 shall include in its end of model year report

    • (a) the number and class of motorcycles that it manufactured or imported under each exemption;

    • (b) the total number of motorcycles that it manufactured or imported for sale in Canada during the model year; and

    • (c) the number of employees of the company worldwide.

  • SOR/2006-268, s. 9
  • SOR/2013-8, s. 15
Date modified: