On-Road Vehicle and Engine Emission Regulations
35 (1) In the case of a vehicle or engine that is covered by an EPA certificate and that, as authorized by subsection 19(1), conforms to the certification and in-use standards referred to in the EPA certificate instead of the standards set out in sections 11 to 17, evidence of conformity for the purpose of paragraph 153(1)(b) of the Act in respect of a company shall consist of
(a) a copy of the EPA certificate covering the vehicle or engine;
(b) one or both of the following:
(c) a copy of the records submitted to the EPA in support of the application for the EPA certificate in respect of the vehicle or the engine and any application for an amendment to that EPA certificate and any records submitted to the EPA to maintain that EPA certificate; and
(d) a U.S. emission control information label, or in the case of a heavy-duty engine a U.S. engine information label, that is permanently affixed to the vehicle or engine in the form and location set out in
(i) section 1807 of Title 40, chapter I, subchapter C, part 86, subpart S, of the CFR for the applicable model year of light-duty vehicle, light-duty truck, medium-duty passenger vehicle, Class 2B vehicle or Class 3 vehicle,
(ii) section 413 of Title 40, chapter I, subchapter C, part 86, subpart E, of the CFR for the applicable model year of motorcycle,
(iii) section 35 of Title 40, chapter I, subchapter C, part 86, subpart A, of the CFR for the applicable model year of heavy-duty vehicle other than medium-duty passenger vehicles, Class 2B vehicles and Class 3 vehicles, and
(iv) section 35 of Title 40, chapter I, subchapter C, part 86, subpart A, of the CFR for the applicable model year of heavy-duty engine.
(1.1) In the case of a vehicle or engine referred to in subsection (1) that is not sold in the United States or that does not have a national emission mark applied to it, a company shall submit the evidence of conformity to the Minister before importing the vehicle or the engine or applying a national emissions mark to it.
(2) For the purpose of subsection (1), the U.S. emission control information label may be affixed to the vehicle or engine in any other form and location that may be specified in the CFR.
- SOR/2013-8, s. 16
- SOR/2015-186, s. 43
- Date modified: