Government of Canada / Gouvernement du Canada
Symbol of the Government of Canada

Search

Canadian Energy Regulator Processing Plant Regulations

Version of section 1 from 2006-03-22 to 2008-09-04:


 The definitions in this section apply in these Regulations.

abandon

abandon means to remove permanently from service. (cessation d’exploitation)

Act

Act means the National Energy Board Act. (Loi)

construction

construction means building or fabricating and includes any clearing or grading required for the purpose of building or fabricating. (construction)

deactivate

deactivate means to remove temporarily from service. (mettre hors service)

environment

environment means the components of the Earth and includes

  • (a) air, land and water;

  • (b) all layers of the atmosphere;

  • (c) all organic and inorganic matter and living organisms; and

  • (d) the interacting natural systems that include components referred to in paragraphs (a) to (c). (environnement)

incident

incident means an occurrence that results or could result in a significant adverse effect on property, the environment or the safety of persons. (incident)

operate

operate includes repair, maintain, deactivate and reactivate. (exploiter)

pressure piping

pressure piping means an assembly of pipes, pipe fittings, valves, safety devices, pumps, compressors and other equipment that is designed for the transport of fluids and is connected to a boiler or pressure vessel. (tuyauterie sous pression)

pressure vessel

pressure vessel means a vessel that is designed for the containment of fluids at internal gauge pressures of more than 103 kPa, has an internal volume of more than 42.5 L and has an internal diameter of more than

  • (a) 152 mm, if it is not in water service; or

  • (b) 610 mm, if it is in water service. (appareil sous pression)

processing plant

processing plant means a plant used for the processing, extraction or conversion of fluids and all structures located within the boundaries of the plant, including compressors and other structures integral to the transportation of fluids. (usine de traitement)

release

release includes discharge, spray, spill, leak, seep, pour, emit, dump and exhaust. (rejet)


Date modified: