SCHEDULE 2(Subsections 28(1) and (2))Information Required to Identify a Storage Tank System
1
Name of owner of the storage tank system
2
Mailing address of owner
3
Name of operator of the storage tank system, if different from owner
4
Mailing address of operator
5
The allied petroleum product or the type of petroleum product stored in each tank of the storage tank system
6
Location of the storage tank system (civic address or, if no civic address exists, Global Positioning System (GPS) coordinates or latitude and longitude)
7
Civic address of the location where the storage tank system records are stored
8
Months during which the storage tank system is in service
9
Nominal capacity of each tank of the storage tank system
10
Year of installation of each tank of the storage tank system
11
Type of each tank of the storage tank system
12
Each tank’s ULC or API Standard Number
13
Material used in the construction of each tank
14
Type of corrosion protection of each tank
15
Type of secondary containment of each tank
16
Type of overfill protection of each tank
17
Type of piping of the storage tank system
18
Material used in the construction of the piping
19
Diameter of the piping
20
Type of corrosion protection of the piping
21
Type of secondary containment of the piping
22
Type of spill containment devices
23
Description of petroleum product and allied petroleum product transfer areas
24
Type of leak detection
25
Type of pump for transfer to the oil-water separator
