PCB Regulations

Version of section 37 from 2008-09-05 to 2010-03-10:


Marginal note:Stored PCBs or products — PCB concentration of 50 mg/kg or more

 The person who owns and stores PCBs or products containing PCBs in a concentration of 50 mg/kg or more, other than the equipment and liquids referred to in section 33, shall prepare a report that is current to December 31 in each calendar year in which the person stores the PCBs or products at their PCB storage site and that contains the following information:

  • (a) the name, civic and mailing addresses, telephone number, fax number, if any, and e-mail address, if any, of the owner and of any person authorized to act on the owner’s behalf;

  • (b) the civic addresses of the PCB storage sites where the PCBs or products are located, or if there is no civic address, their location using the owner’s site identification system;

  • (c) the quantity of liquids containing PCBs in the products, expressed in litres, and the quantity of solids containing PCBs in the products, expressed in kilograms, and the concentration of PCBs in the liquids and the solids, expressed in mg/kg

    • (i) that are stored on December 31 at the person’s PCB storage site,

    • (ii) that are sent, in that calendar year, to an authorized facility that is a transfer site,

    • (iii) that are sent, in that calendar year, to an authorized facility that is authorized to destroy them, or

    • (iv) that are destroyed in that calendar year; and

  • (d) a certification that the information is accurate and complete and that is dated and signed by the owner of the PCBs or products containing PCBs or by a person authorized to act on the owner’s behalf.

Date modified: