Motor Vehicle Restraint Systems and Booster Seats Safety Regulations

Marginal note:Webbing

405 Any webbing that is designed to secure a booster seat to a user-ready tether anchorage or to a lower universal anchorage system must

• (a) when tested in accordance with S5.1(b) of TSD 209, before being tested for resistance to abrasion as specified in S5.1(d) or S5.3(c) of TSD 209, for resistance to light as specified in S5.1(e) of TSD 209 or for resistance to micro-organisms as specified in S5.1(f) of TSD 209, have a breaking strength of at least 15 000 N;

• (b) when tested in accordance with S5.1(b) of TSD 209, after being tested for resistance to abrasion as specified in S5.1(d) or S5.3(c) of TSD 209, have a breaking strength of at least 75% of its initial breaking strength; and

• (c) conform to the requirements of S4.2(e) and (f) of TSD 209 and subsections 209(3) to (6) of Schedule IV to the Motor Vehicle Safety Regulations.