Heavy-duty Vehicle and Engine Greenhouse Gas Emission Regulations

Version of section 24 from 2013-02-22 to 2018-11-15:


Marginal note:General

  •  (1) The N2O, CH4 and CO2 emission values for Class 2B and Class 3 heavy-duty vehicles and cab-complete vehicles — excluding those referred to in the definition vocational vehicle in subsection 1(1) and the vehicles referred to in subsection (2) — must be determined in accordance with subsection (3) or (4), as the case may be, and

    • (a) using

      • (i) the test procedures, fuels and calculation methods set out for the FTP-based city test and the HFET-based highway test, and

      • (ii) the adjusted loaded vehicle weight and the deterioration factors determined using the durability procedures and method prescribed in section 1823(m) of Title 40, chapter I, subchapter C, part 86, subpart S, of the CFR; and

    • (b) taking into account

      • (i) sections 104(d)(5) and 150(e) of Title 40, chapter I, subchapter U, part 1037, subpart B, of the CFR, and

      • (ii) the altitude testing conditions set out in section 1865(h)(3) of Title 40, chapter I, subchapter C, part 86, subpart S, of the CFR.

  • Marginal note:Electric vehicles and fuel cell vehicles

    (2) In the case of Class 2B and Class 3 heavy-duty vehicles and cab-complete vehicles — excluding those referred to in the definition vocational vehicle in subsection 1(1) — that are electric vehicles or fuel cell vehicles, the N2O, CH4 and CO2 emission values are considered to be 0 grams per mile.

  • Marginal note:Multi-fuel, dual fuel or flexible fuel

    (3) In the case of Class 2B or Class 3 heavy-duty vehicles and cab-complete vehicles — excluding those referred to in the definition vocational vehicle in subsection 1(1) — that are designed to operate on two or more different fuel types, either separately or simultaneously, the N2O, CH4 and CO2 emission values for a given vehicle or vehicle configuration, as the case may be, must be determined using

    • (a) in the case of N2O and CH4 emissions, the highest of the following averages:

      • (i) the arithmetic average of the FTP-based city test and HFET-based highway test emission values, determined in accordance with this section, for that vehicle configuration, weighted 0.55 and 0.45 respectively, tested on gasoline or diesel fuel, and

      • (ii) the arithmetic average of the FTP-based city test and HFET-based highway test emission values, determined in accordance with this section, for that vehicle configuration, weighted 0.55 and 0.45 respectively, tested on the alternative fuel; and

    • (b) in the case of CO2 emissions, the formula

      (F × A) + ((1 – F) × B)

      where

      F
      is 0.00 unless the company provides the Minister with evidence demonstrating that an alternative value determined for F is more representative for that vehicle configuration,
      A
      is the arithmetic average of the FTP-based city test and HFET-based highway test emission values, determined in accordance with this section, for that vehicle configuration, weighted 0.55 and 0.45 respectively, tested on the alternative fuel, and
      B
      is the arithmetic average of the FTP-based city test and HFET-based highway test emission values, determined in accordance with this section, for that vehicle configuration, weighted 0.55 and 0.45 respectively, tested on gasoline or diesel fuel.
  • Marginal note:Other cases

    (4) In the case of other Class 2B and Class 3 heavy-duty vehicles and cab-complete vehicles — excluding those referred to in the definition vocational vehicle in subsection 1(1) — the N2O, CH4 and CO2 emission values must be determined as follows:

    • (a) in the case of N2O and CH4 emissions, by calculating the arithmetic average of the FTP-based city test and HFET-based highway test emission values, weighted 0.55 and 0.45 respectively; and

    • (b) in the case of CO2 emissions,

      • (i) by making the calculation set out in paragraph (a), or

      • (ii) by calculating the CO2 emission rate in accordance with section 104(g) of Title 40, chapter I, subchapter U, part 1037, subpart B, of the CFR.

Date modified: