Government of Canada / Gouvernement du Canada
Symbol of the Government of Canada

Search

Heavy-duty Vehicle and Engine Greenhouse Gas Emission Regulations

Version of section 9 from 2015-07-16 to 2018-11-15:


Marginal note:Non EPA-certified vehicles

  •  (1) Heavy-duty vehicles that are imported or manufactured in Canada — other than EPA-certified heavy-duty vehicles that bear the label referred to in subparagraph 53(d)(i) — must bear a compliance label that sets out the following information:

    • (a) subject to subsection (2), the statement “THIS VEHICLE CONFORMS TO ALL APPLICABLE STANDARDS PRESCRIBED BY THE CANADIAN HEAVY-DUTY VEHICLE AND ENGINE GREENHOUSE GAS EMISSION REGULATIONS IN EFFECT FOR MODEL YEAR [MODEL YEAR] / CE VÉHICULE EST CONFORME À TOUTES LES NORMES QUI LUI SONT APPLICABLES EN VERTU DU RÈGLEMENT SUR LES ÉMISSIONS DE GAZ À EFFET DE SERRE DES VÉHICULES LOURDS ET DE LEURS MOTEURS DU CANADA EN VIGUEUR POUR L’ANNÉE DE MODÈLE [ANNÉE DE MODÈLE]”;

    • (b) the name of the vehicle’s manufacturer;

    • (c) the vehicle’s model year if a national emissions mark is applied to the vehicle;

    • (d) subject to subsection (3), the vehicle’s date of manufacture;

    • (e) the type of vehicle, in both official languages, referred to in subparagraphs 18(3)(a)(i) to (xiii);

    • (f) the vehicle family or the test group, as the case may be;

    • (g) the identification of the emission control system;

    • (h) in the case of a vocational vehicle referred to in subsection 26(3), a statement, in both official languages, that the vehicle is exempted under that subsection;

    • (i) in the case of a vocational tractor, a statement, in both official languages, that the vehicle is a vocational tractor;

    • (j) in the case of a vocational vehicle or a tractor that is exempted under section 17, a statement to that effect, in both official languages; and

    • (k) in the case of a Class 2B or Class 3 heavy-duty vehicle or cab-complete vehicle — excluding those referred to in the definition vocational vehicle in subsection 1(1) — the engine displacement and the CO2 emission value determined by variable A in accordance with subsection 23(1) for that vehicle configuration and if applicable, the N2O and CH4 family emission limits.

  • Marginal note:National emissions mark

    (2) Paragraph (1)(a) does not apply when a national emissions mark is applied to the vehicle or when the statement referred to in paragraph (1)(h) or (j) is set out on the label.

  • Marginal note:Date of manufacture

    (3) The date of manufacture referred to in paragraph (1)(d) may, instead of being set out on the label, be permanently affixed, engraved or stamped on the vehicle.

  • SOR/2015-186, s. 63

Date modified: