Energy Efficiency Regulations, 2016

Marginal note:Information on principal display panel

• 426 (1) The principal display panel of the product’s package must display the following information in the following order:

  • (a) except in the case of a BR or ER lamp, the words “Light Output” and “Flux lumineux”, followed by the numerical value of the product’s luminous flux and the word “lumens”;

  • (b) the words “Energy Used” and “Consommation d’énergie”, followed by the numerical value of the product’s nominal power and the word “watts”; and

  • (c) the words “Life” and “Durée de vie”, followed by the numerical value of the product’s life and the words “hours” and “heures”, respectively.

• Marginal note:Font and size

  (2) The words “Light Output”, “Flux lumineux”, “Energy Used”, “Consommation d’énergie”, “Life” and “Durée de vie” must be in the same font and be equal in size.

• Marginal note:Font and size

  (3) The words “lumens”, “watts”, “hours” and “heures” must be in the same font and be equal in size, but they must not be more than 50% of the size of the words referred to in subsection (2).

• Marginal note:Font and size

  (4) The numerical values indicating the product’s luminous flux, nominal power and life must be in the same font and be equal in size.

• Marginal note:Three-way lamps

  (5) If the product is a three-way lamp, the information required by paragraphs (1)(a) and (b) must be displayed for each level of the lamp’s operation.