Energy Efficiency Regulations, 2016

Marginal note:Energy efficiency standards

• 435 (1) The energy efficiency standards set out in column 2 of the table to this section apply to general service lamps described in column 1 that are manufactured during the periods set out in column 3.

• Marginal note:Testing standard

  (2) A general service lamp complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures that are applicable to a general service lamp as defined in section 433 and set out in the following standards:

  • (a) IES LM45 for the nominal power;

  • (b) IES LM49 for the life of the product; and

  • (c) CIE 13.3 for the colour rendering index.

• Marginal note:Adjusted testing procedure

  (3) The testing referred to in subsection (2) must, despite any provision to the contrary in the identified standard, be conducted with the lamp operating at 120 V regardless of its nominal voltage.

  	Column 1	Column 2	Column 3
  Item	Energy-using Product	Energy Efficiency Standard	Period of Manufacture
  1	General service lamps that have a luminous flux of < 750 lm	Nominal power ≤ 29 W Life ≥ 1 000 hours Colour rendering index ≥ 80	On or after December 31, 2014
  2	General service lamps that have a luminous flux of ≥ 750 lm and < 1 050 lm	Nominal power ≤ 43 W Life ≥ 1 000 hours Colour rendering index ≥ 80	On or after December 31, 2014
  3	General service lamps that have a luminous flux of ≥ 1 050 lm and < 1 490 lm	Nominal power ≤ 53 W Life ≥ 1 000 hours Colour rendering index ≥ 80	On or after January 1, 2014
  4	General service lamps that have a luminous flux of ≥ 1 490 lm	Nominal power ≤ 72 W Life ≥ 1 000 hours Colour rendering index ≥ 80	On or after January 1, 2014