Energy Efficiency Regulations, 2016

Marginal note:Nameplate required

• 658 (1) Every walk-in door assembly and walk-in panel that is manufactured on or after June 26, 2017 must be labelled with a nameplate that is attached to the outside of the product in a location that is readily visible prior to assembly of the walk-in cooler or walk-in freezer and that sets out the following information in English and French:

  • (a) the brand name or manufacturer of the product; and

  • (b) a statement indicating whether the product is intended for use in a walk-in cooler, walk-in freezer or both.

• Marginal note:Additional requirements

  (2) Every walk-in cooler dedicated condensing refrigeration system that is manufactured on or after January 1, 2020 and every walk-in refrigeration system that is manufactured on or after July 10, 2020 must be labelled with a nameplate that is attached to the outside of the product in a location that is readily visible prior to assembly of the walk-in cooler or the walk-in freezer and that sets out the following information in English and French:

  • (a) the brand name or manufacturer of the product;

  • (b) a statement indicating whether the product is intended for use in a walk-in cooler, walk-in freezer or both;

  • (c) the model number;

  • (d) the product’s date of manufacture, if it is not included in the model number; and

  • (e) a statement indicating that the product is for indoor use only, if applicable.

• Marginal note:Idem

  (3) For matched refrigeration systems, the statement referred to in paragraph (2)(e) must appear on the dedicated condensing unit.