Output-Based Pricing System Regulations

Marginal note:Total GHGs

• 17 (1) Subject to subsection (5) and section 18, the total quantity of GHGs from a covered facility other than an electricity generation facility, during a compliance period, expressed in CO₂e tonnes, is determined by the formula

  

  where

  E_j

  is the quantity of each GHG type “j” from the covered facility during a compliance period, for each specified emission type, determined in accordance with subsections (2) to (4);

  GWP_j

  is the global warming potential of the GHG type “j” applicable to the compliance period and, if it is used to determine the quantities referred to in the descriptions of A, C and F in subsection 37(1), for the reference year “i”, the global warming potential applicable to the compliance period in respect of which the output-based standard is being calculated;

  i

  is the i^th specified emission type, where “i” goes from 1 to n and where n is the number of the facility’s specified emission types; and

  j

  is the j^th GHG type, where “j” goes from 1 to m and where m is the number of greenhouse gases.

• Marginal note:Quantity of each GHG

  (2) The quantity of a GHG type “j” from a covered facility during a compliance period for a specified emission type “i” is the sum of the following quantities, determined in accordance with the applicable requirements set out in Quantification Methods:

  • (a) the quantities of that GHG from industrial activities set out in column 1 of Schedule 1 and set out in column 2 of the table to the Part of Schedule 3 that is applicable to those industrial activities, for a specified emission type set out in column 1 of that table;

  • (b) the quantities of that GHG from those industrial activities, but not set out in column 2 of the table to the Part of Schedule 3 that applies to those activities or for a specified emission type not set out in column 1 of that table; and

  • (c) any quantity of that GHG that is not referred to in paragraph (a) or (b).

• Marginal note:Sampling, analysis and measurement requirements

  (3) If the quantity of a GHG is determined in accordance with subsection (2), the sampling, analysis and measurement requirements that apply are those set out in Quantification Methods.

• Marginal note:Missing data

  (4) For the purposes of subsection (2), if, for any reason beyond the control of the person responsible for a covered facility, the data required to quantify the GHGs from a covered facility are missing for a given period of a compliance period, replacement data for the given period must be calculated in accordance with Quantification Methods.

• (4.1) [Repealed, SOR/2023-240, s. 12]

• Marginal note:Biomass — exclusion of CH₄ and N₂O

  (5) For the purposes of the determination made under subsection (1), the quantities of CH₄ and N₂O generated from stationary devices that combust biomass for the purpose of producing useful heat are subtracted from the quantities of CH₄ and N₂O calculated in accordance with subsections (2) to (4) for stationary fuel combustion emissions.