Canadian Aviation Regulations

302.417 (1) The operator of an airport shall

• (a) inspect movement areas and prepare AMSCRs in accordance with section 322.417 of the Airport Standards — Airport Winter Maintenance;

• (b) include a CRFI in each AMSCR if section 302.416 applies to the operator;

• (c) forward AMSCRs to the air navigation services provider in a manner that will permit its prompt dissemination to aircraft operators;

• (d) provide the aeronautical information publications provider with information about the availability of CRFIs and AMSCRs for publication in the Canada Flight Supplement; and

• (e) include information in the airport operations manual about the availability of CRFIs and AMSCRs.

(2) Despite paragraph (1)(b), the operator of the airport shall not include friction readings in an AMSCR if those friction readings are obtained from a runway surface using a decelerometer and if

• (a) the runway surface is wet but there is no contaminant;

• (b) on the runway surface there is a layer of slush but no other contaminant;

• (c) on the runway surface there is wet snow that, when stepped on or driven on, splatters, turns to slush or results in the presence of visible water; or

• (d) on the runway surface there is dry snow or wet snow that exceeds 2.5 cm (one inch) in depth.