Government of Canada / Gouvernement du Canada
Symbol of the Government of Canada

Search

Canadian Aviation Regulations

Version of section 602.11 from 2006-03-22 to 2014-05-28:

  •  (1) In this section, critical surfaces means the wings, control surfaces, rotors, propellers, horizontal stabilizers, vertical stabilizers or any other stabilizing surface of an aircraft and, in the case of an aircraft that has rear-mounted engines, includes the upper surface of its fuselage.

  • (2) No person shall conduct or attempt to conduct a take-off in an aircraft that has frost, ice or snow adhering to any of its critical surfaces.

  • (3) Notwithstanding subsection (2), a person may conduct a take-off in an aircraft that has frost adhering to the underside of its wings that is caused by cold-soaked fuel, if the take-off is conducted in accordance with the aircraft manufacturer’s instructions for take-off under those conditions.

  • (4) Where conditions are such that frost, ice or snow may reasonably be expected to adhere to the aircraft, no person shall conduct or attempt to conduct a take-off in an aircraft unless

    • (a) for aircraft that are not operated under Subpart 5 of Part VII,

      • (i) the aircraft has been inspected immediately prior to take-off to determine whether any frost, ice or snow is adhering to any of its critical surfaces, or

      • (ii) the operator has established an aircraft inspection program in accordance with the Operating and Flight Rules Standards, and the dispatch and take-off of the aircraft are in accordance with that program; and

    • (b) for aircraft that are operated under Subpart 5 of Part VII, the operator has established an aircraft inspection program in accordance with the Operating and Flight Rules Standards, and the dispatch and take-off of the aircraft are in accordance with that program.

  • (5) The inspection referred to in subparagraph (4)(a)(i) shall be performed by

    • (a) the pilot-in-command;

    • (b) a flight crew member of the aircraft who is designated by the pilot-in-command; or

    • (c) a person, other than a person referred to in paragraph (a) or (b), who

      • (i) is designated by the operator of the aircraft, and

      • (ii) has successfully completed an aircraft surface contamination training program pursuant to Subpart 4 or Part VII.

  • (6) Where, before commencing take-off, a crew member of an aircraft observes that there is frost, ice or snow adhering to the wings of the aircraft, the crew member shall immediately report that observation to the pilot-in-command, and the pilot-in-command or a flight crew member designated by the pilot-in-command shall inspect the wings of the aircraft before take-off.

  • (7) Before an aircraft is de-iced or anti-iced, the pilot-in-command of the aircraft shall ensure that the crew members and passengers are informed of the decision to do so.


Date modified: