Transportation of Dangerous Goods Regulations

5.14 (1) A person must not handle, offer for transport or transport dangerous goods included in Class 3, 4, 5, 6.1, 8 or 9 in a large means of containment unless it is manufactured, selected and used in accordance with

• (a) for transport by road vehicle,

  • (i) the requirements of Part II of CGSB-43.146, if the means of containment is a UN standardized means of containment,

  • (ii) CSA B621, except clause 8.2(b), and, despite any indication to the contrary in CSA B620, Annex B of CSA B620,

  • (iii) CSA B625, or

  • (iv) TP 14877, if the means of containment is a ton container;

• (b) for transport by railway vehicle,

  • (i) the requirements of Part II of CGSB-43.146, if the means of containment is a UN standardized means of containment,

  • (ii) TP 14877, or

  • (iii) CSA B625;

• (c) for transport by aircraft, Part 12 (Air) of these Regulations; and

• (d) for transport by vessel,

  • (i) the requirements of Part II of CGSB-43.146, if the means of containment is a UN standardized means of containment,

  • (ii) TP 14877,

  • (iii) CSA B621, except clause 8.2(b), and, despite any indication to the contrary in CSA B620, Annex B of CSA B620, or

  • (iv) CSA B625.

(1.1) [Repealed, SOR/2019-75, s. 7]

(2) In addition to the requirements of subparagraphs (1)(a)(ii) and (d)(iii), a person who uses a standardized means of containment that is required by CSA B621 to offer for transport dangerous goods included in Class 3, 4, 5, 6.1, 8 or 9 must use a means of containment

• (a) manufactured in accordance with CSA B620 if the means of containment was manufactured in Canada on or after August 31, 2008; and

• (b) tested and inspected in accordance with CSA B620 when the most recent periodic re-test or periodic inspection is performed in Canada on or after August 31, 2008.

(3) [Repealed, SOR/2017-137, s. 43]

(4) [Repealed, SOR/2017-137, s. 43]