Canadian Aviation Regulations

305.35 (1) The operator of a heliport shall ensure that the markers installed at the heliport are either flush mounted or lightweight and frangibly mounted and in accordance with the requirements of the applicable heliport standard.

(2) The operator of a heliport shall provide FATO markers where

• (a) a FATO edge marking is not provided; and

• (b) the extent of the FATO and the adjacent ground is not conspicuous.

(3) The operator of a heliport shall provide ground taxiway edge markers in accordance with the requirements of the applicable heliport standard if the helicopters must travel along a ground taxiway to or from a FATO to an apron, unless

• (a) the edges of the taxiway are conspicuous;

• (b) taxiway centre line lights are provided;

• (c) taxiway edge lights are provided; or

• (d) taxiway centre line markers are provided.

(4) The operator of a heliport shall provide air taxiway markers if the helicopters must travel by air to or from a FATO to an apron via a specific corridor in accordance with the applicable heliport standard.