Cellulose Fibre Insulation Regulations
P.C. 2016-604 2016-06-21
His Excellency the Governor General in Council, on the recommendation of the Minister of Health, pursuant to section 37 of the Canada Consumer Product Safety ActFootnote a, makes the annexed Cellulose Fibre Insulation Regulations.
Return to footnote aS.C. 2010, c. 21
1 The following definitions apply in these Regulations.
- cellulose fibre insulation
cellulose fibre insulation means cellulose fibre for use as loose-fill thermal insulation in the interior of new and existing buildings. (isolant en fibres cellulosiques)
- insulation standard
insulation standard means the Underwriters Laboratories of Canada standard CAN/ULC-S703, entitled Standard for Cellulose Fibre Insulation for Buildings, as amended from time to time. (norme sur l’isolant)
Marginal note:Minimum critical radiant flux
2 (1) When cellulose fibre insulation is tested in accordance with section 6.3.9 of the insulation standard, all three test specimens must have a critical radiant flux greater than or equal to 0.12 W/cm2.
Marginal note:Additional specimens
(2) Despite subsection (1), if only one of the three test specimens has a critical radiant flux less than 0.12 W/cm2, three more specimens must be tested, all of which must have a critical radiant flux greater than or equal to 0.12 W/cm2.
Marginal note:Combustion and loss of mass
3 Cellulose fibre insulation must not exhibit any flaming combustion or any loss of mass greater than 15% when tested in accordance with sections 6.3.3 and 6.3.12 of the insulation standard.
Marginal note:Separation of non-cellulosic components
4 Cellulose fibre insulation must not exhibit any separation of non-cellulosic components greater than 1.5% by mass when tested in accordance with section 6.3.11 of the insulation standard.
Marginal note:Corrosiveness — metal
5 A test specimen that is made of aluminum, copper or steel must not exhibit any perforation when cellulose fibre insulation is tested in accordance with section 6.3.2 of the insulation standard.
Marginal note:Required information
Marginal note:Exception — no container
(2) If the cellulose fibre insulation has no container, the information must be marked on the packaging or, if there is no packaging, on the bill of sale or other document given to the consumer at the time of sale.
Coming into Force
8 These Regulations come into force on the day on which they are registered.
- Date modified: