-
19 (1) A record must be made that indicates for each compressor referred to in section 14
-
[...]
-
(c) its rated brake power;
-
[...]
-
(e) if applicable, the type of hydrocarbon gas conservation equipment or hydrocarbon gas destruction equipment to which the emissions of hydrocarbon gas from the its seals or rod packing and distance pieces, as the case may be, are captured and routed, namely
[...]
-
(2) A record must be made that indicates, for each measurement, including a remeasurement, the flow rate of emissions from a vent referred to in paragraph 14(b) made by means of a flow meter referred to in paragraph 15(a),
-
[...]
-
(c) the date on which the measurement was taken;
-
[...]
-
(e) any recommendation for the taking of the measurement, along with supporting documents;
-
(3) A record must be made that indicates, for each measurement, including a remeasurement, of the flow rate of emissions from a vent referred to in paragraph 14(b) made by means of a continuous monitoring device referred to in paragraph 15(b),
-
[...]
-
(c) the recommendations of the manufacturer for the calibration of the continuous monitoring device referred to in paragraph 17(a) along with a demonstration, with supporting documents, that the measurements taken with that calibration have a maximum margin of error of ±10%.
-
(4) A record must be made that indicates, for each corrective action taken,
-
[...]
-
(c) for each remeasurement taken under paragraph 18(4)(b), the volume and estimated volume, determined for the purpose of that paragraph, along with supporting calculations; and
