Basic Search

 
 
Display / Hide Categories
4 results
Didn't find what you're looking for?
Search all Government of Canada websites
  1. Reduction of Carbon Dioxide Emissions from Coal-fired Generation of Electricity Regulations - SOR/2012-167 (SCHEDULE 5 : List of Fuels)

    [...]

    [...]

    TABLE 2

    Liquid Fuels

    Column 1 Column 2 Column 3
    Item Type of fuel Default higher heating value (GJ/kL) Default CO2 emission factor (kg CO2/GJ)
    2 Light fuel oil 38.8 70.2
    3 Heavy fuel oil 42.5 73.5

    TABLE 4

    List of Fuels for the Purpose of Subsection 24(2)

    Column 1 Column 2 Column 3
    Item Type of fuel Default higher heating value (GJ/kL)Footnote 2 Default CO2 emission factor (kg CO2/GJ)
    1 Distillate fuel oil No.1 38.78 69.37
    2 Distillate fuel oil No. 2 38.50 70.05
    3 Distillate fuel oil No. 4 40.73 71.07

    [...]


  2. Reduction of Carbon Dioxide Emissions from Coal-fired Generation of Electricity Regulations - SOR/2012-167 (Section 24)
    Marginal note:Quantification based on HHV

    • [...]

    • (6) The higher heating value of a fuel is to be measured

      • [...]

      • (b) for a liquid fuel that is

        • (i) an oil or a liquid fuel derived from waste, in accordance with

          [...]

    [...]


  3. Reduction of Carbon Dioxide Emissions from Coal-fired Generation of Electricity Regulations - SOR/2012-167 (Section 21)
    Marginal note:Quantification

    • [...]

    • (3) The default value for the fuel-specific carbon-based F-factor for certain types of fossil fuel is set out in column 3 of the following table:

      TABLE

      Column 1 Column 2 Column 3
      Item Fossil fuel Type F-factor (standard m3/GJ)
      2 Oil Crude, residual or distillate 39.3

  4. Reduction of Carbon Dioxide Emissions from Coal-fired Generation of Electricity Regulations - SOR/2012-167 (Section 23)
    Marginal note:Measured carbon content

    • [...]

    • (2) The weighted average referred to in paragraphs (1)(a) to (c) as CCA is, based on fuel samples collected in accordance with section 27, to be determined in accordance with the following formula:

      where

      CCi 
      is the carbon content of, as the case may be, the composite sample, or the sample, of the fuel for the ith sampling period expressed for solid fuels, liquid fuels and gaseous fuels, respectively, in the same unit of measure as the one set out in CCA, as provided by the supplier of the fuel to the responsible person and, if not so provided, as determined by the responsible person, and measured

      • [...]

      • (b) for a liquid fuel, in accordance with any of the following standards or methods that applies for the measurement of the carbon content of the fuel:

        • (i) ASTM D3238 - 95(2010), entitled Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method, along with either of the following applicable ASTM standards:

          • [...]

          • (B) ASTM D2502 - 04(2009), entitled Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements,

    [...]


Date modified: