Storage Tank Systems for Petroleum Products and Allied Petroleum Products Regulations
Version of section 35 from 2008-06-12 to 2017-06-01:
35 (1) If the owner or operator of a storage tank system uses an oil-water separator in the operation of the system, the operator must
(a) each month, measure, as close to the baffle as possible, the thickness of the free oil layer and the separated solids layer and keep a record of those measurements with the date of measurement; or
(b) use an oil-water separator that is electronically monitored.
(2) If the owner or operator becomes aware of a leak in the storage tank system or a spill, they must, without delay, measure the thickness of the free oil layer and the separated solids layer in the oil-water separator and keep a record of that measurement.
- Date modified: