Energy Efficiency Regulations, 2016

Marginal note:Information

• 381 (1) For the purpose of subsection 5(1) of the Act, the following information must be provided to the Minister in respect of an oil-fired water heater:

  • (a) its input rate, expressed in kilowatts;

  • (b) its recovery efficiency;

  • (c) its annual energy consumption, expressed in kilojoules;

  • (d) its first-hour rating, expressed in litres;

  • (e) its V_r;

  • (f) its energy factor, if a certification body has verified that the product is in compliance with the energy efficiency standard set out in any of paragraphs 3(a), 4(a), 5(a) and 6(a) of the table to section 380; and

  • (g) its uniform energy factor and V_s, if a certification body has verified that the product is in compliance with the energy efficiency standard set out in any of paragraphs 3(b), 4(b), 5(b) and 6(b) of the table to section 380.

• Marginal note:Standard

  (2) The information must be collected in accordance with one of the following standards:

  • (a) CSA B211-00, if the product

    • (i) was manufactured on or after February 3, 1995 and before January 1, 2018, or

    • (ii) is manufactured on or after January 1, 2018 and a certification body has verified that the product is in compliance with the energy efficiency standard set out in any of paragraphs 3(a), 4(a), 5(a) and 6(a) of the table to section 380; or

  • (b) CSA P.3-15, if the product is manufactured on or after January 1, 2018 and a certification body has verified that the product is in compliance with the energy efficiency standard set out in any of paragraphs 3(b), 4(b), 5(b) and 6(b) of the table to section 380.