Government of Canada / Gouvernement du Canada
Symbol of the Government of Canada


Energy Efficiency Regulations, 2016

Version of section 752 from 2017-06-28 to 2019-04-29:

Marginal note:Information

 For the purpose of subsection 5(1) of the Act, the following information must be provided to the Minister:

  • (a) in respect of a motor for which a unique motor identifier was not provided under paragraph 5(1)(c),

    • (i) its nominal power, expressed in kilowatts for an IEC-design motor or in horsepower for a NEMA-design motor,

    • (ii) the number of poles, and

    • (iii) the construction of the product, namely, open construction or enclosed construction; and

  • (b) in respect of a motor described in column 1 of the table to this section, the information set out in column 3, which must be collected in accordance with the standard set out in column 2.


Column 1Column 2Column 3
ItemEnergy-using ProductStandardInformation
1Motors manufactured on or after February 3, 1995 and before June 1, 2016CSA C390-10
  • (a) nominal efficiency value;

  • (b) NEMA or IEC design of motor;

  • (c) frame type;

  • (d) motor configuration, namely, close-coupled pump motor, vertically mounted solid shaft normal thrust motor, fire pump motor or motor that is part of an integral gear assembly;

  • (e) shaft type;

  • (f) mounting type; and

  • (g) motor configuration, namely, footless, with feet or with detachable feet.

2Motors manufactured on or after June 1, 2016CSA C390-10 or IEEE112-2004
  • (a) nominal efficiency value;

  • (b) NEMA or IEC design of motor; and

  • (c) motor configuration, namely, fire pump motor medical imaging motor or another configuration.

Date modified: