Norman Wells Airport Zoning Regulations (SOR/82-296)

Regulations are current to 2019-07-29

SCHEDULE(s. 6)

PART IDescription of the Airport Reference Point

The airport reference point is a point determined by commencing at the point of intersection of the centre line of runway 08-26 with the westerly boundary of Lot 11, Group 1158, Plan 57303 (C.L.S.R.) 750 (L.T.O.), thence proceeding easterly along the said centre line of runway 08-26 a distance of 2 436.14 m.

PART IIDescription of Outer Limits of Land

A circular area having a radius of 4 000 m, the centre of which is the airport reference point.

PART IIIDescription of the Approach Surfaces

The approach surfaces, shown on Department of Transport Norman Wells Airport Zoning Plan No. E.1562, are surfaces abutting each end of the strip associated with the runway designated 08-26 and are described as follows:

  • (a) a surface abutting the end of the strip associated with runway approach 08,

  • (b) a surface abutting the end of the strip associated with runway approach 26,

consisting of an inclined plane having a ratio of 1 m measured vertically to 50 m measured horizontally rising to an imaginary horizontal line drawn at right angles to the projected centre line of the strip, 300 m measured vertically above the elevation at the end of the strip, and 15 000 m measured horizontally from the end of the strip, the outer ends of the imaginary horizontal line being 2 400 m from the projected centre line.

PART IVDescription of the Outer Surface

The outer surface, shown on Department of Transport Norman Wells Airport Zoning Plan No. E.1562, is an imaginary surface located at a common plane established at a constant elevation of 45 m above the assigned elevation of the airport reference point except where that common plane is less than 9 m above the surface of the ground, the imaginary surface is located 9 m above the surface of the ground.

PART VDescription of the Strip

The strip, shown on Department of Transport Norman Wells Airport Zoning Plan No. E.1562, is described as follows:

the strip associated with runway 08-26 is 300 m in width, 150 m being on each side of the centre line of the runway and 1 948.8 m in length.

PART VIDescription of Each Transitional Surface

Each transitional surface, shown on Department of Transport Norman Wells Airport Zoning Plan No. E.1562, is a surface consisting of an inclined plane having a ratio of 1 m measured vertically to 7 m measured horizontally at right angles to the centre line and centre line produced of the strip and extending upward and outward from the lateral limits of the strip and its approach surfaces to an intersection with the outer surface.

 
Date modified: