Canadian Aviation Regulations

521.365 The holder of a design approval document in respect of an aeronautical product shall

• (a) establish and maintain a system for recording

  • (i) the type design of the aeronautical product,

  • (ii) the analyses, tests and inspections that were conducted to demonstrate the conformity of the aeronautical product with its certification basis,

  • (iii) the certification plan and record and the declaration attesting to the demonstration of conformity of the aeronautical product with its certification basis,

  • (iv) the data developed by the holder and required to maintain the aeronautical product in an airworthy condition, and

  • (v) the distribution or initial sale of the aeronautical product;

• (b) at the request of the Minister, make available to the Minister the design approval document, the type design and any of the information recorded under paragraph (a); and

• (c) notify the Minister in writing if the holder no longer intends to make the records specified in paragraph (a) available for the purpose of manufacture, modification, repair or installation of the aeronautical product or for maintaining the airworthiness of the aeronautical product.