Marginal note:End of use of equipment and liquids — 2009
33 (1) The owner of the equipment referred to in paragraph 16(1)(a) and subparagraph 16(1)(b)(i), other than the equipment for which an extension is granted by the Minister in accordance with section 17, or the liquids referred to in subsection 15(2) shall prepare a report that is current to December 31 of each calendar year in which the person owns the equipment or the liquids and that contains the following information:
(a) the name, civic and mailing addresses, telephone number, fax number, if any, and e-mail address, if any, of the owner and any person authorized to act on the owner’s behalf;
(b) the civic addresses of the facilities where the equipment and liquids are located or, if there is no civic address, their location using the owner’s site identification system;
(c) the quantity of the liquids containing PCBs in the equipment and of the liquids, expressed in litres,
(i) that are in use on December 31,
(ii) that are stored on December 31 at the person’s PCB storage site,
(iii) that are sent, in that calendar year, to an authorized facility that is a transfer site,
(iv) that are sent, in that calendar year, to an authorized facility that is authorized to destroy them, or
(v) that are destroyed in that calendar year; and
(d) a certification that the information is accurate and complete and that is dated and signed by the owner or by a person authorized to act on the owner’s behalf.
Marginal note:Equipment and liquids for which extension granted
(2) The owner of the equipment referred to in paragraph 16(1)(a) and subparagraph 16(1)(b)(i) or the liquids referred to in subsection 15(2) for which an extension is granted by the Minister in accordance with section 17 shall prepare a report that is current to December 31 of each calendar year in which the person owns the equipment or the liquids and that contains the following information for each piece of equipment or container of liquid:
(a) the information required under paragraphs (1)(a) and (d);
(b) the unique identification number that is on the label referred to in paragraph 29(4)(c);
(c) the civic address, function and technical description of the facility where the equipment or container of liquid is located or, if there is no civic address, its location using the owner’s site identification system;
(d) the progress on the plan’s implementation and the timelines for ending the use of the equipment;
(e) the measures taken to minimize or eliminate any harmful effect of the PCBs in the equipment on the environment and on human health; and
(f) the findings of the inspections of the equipment.
Marginal note:End of use of equipment — 2025
(3) The owner of the equipment referred to in subparagraph 16(1)(b)(ii) and subsection 16(2) shall prepare a report that is current to December 31 of each calendar year in which the person owns the equipment and that contains the following information:
(a) the information required under paragraphs (1)(a), (b) and (d); and
(b) the quantity, expressed in litres, of liquids containing PCBs in the equipment, and the concentration, expressed in mg/kg, of the PCBs
(i) that are stored on December 31 at the person’s PCB storage site,
(ii) that are sent, in that calendar year, to an authorized facility that is a transfer site,
(iii) that are sent, in that calendar year, to an authorized facility that is authorized to destroy them, or
(iv) that are destroyed in that calendar year.
- Date modified: