Government of Canada / Gouvernement du Canada
Symbol of the Government of Canada

Search

United States Surtax Remission Order (SOR/2018-205)

Regulations are current to 2019-07-01 and last amended on 2019-06-25. Previous Versions

SCHEDULE 2(Subsection 1(1) and paragraph 1(2)(b))

Column 1
ItemDescription of Goods
1Flat-rolled product, not further worked than hot-rolled, of grade 1037, of a minimum width of 47.375 inches
2Flat-rolled product, cold-rolled, spheroidized, annealed, of grade 4130
3Flat-rolled product, cold-rolled, annealed spring steel, of grade SAE 1095
4Flat-rolled product, cold-rolled, in coils, spheroidized annealed, of grade 10B21
5Flat-rolled product, galvannealed, of grade HSLA 70, of a minimum width of 44.125 inches
6Flat-rolled product, galvanized, of grade HSLA 70, of a minimum width of 43.29 inches
7Flat-rolled product, annealed spring steel of grade C1070 CR
8[Repealed, SOR/2019-262, s. 22]
9Flat-rolled product, cold-rolled, of AISI 1055 carbon steel
10Flat-rolled product, cold-rolled, annealed strip steel, of grade C1050
11Bar and rod of grade AISI 52100
12I-section beams of iron or non-alloy steel
13Unequal leg angles with dimensions exceeding 7 inches by 4 inches by 0.5 inch, of iron or non-alloy steel
14Angle, shape and section, MC channels of a depth exceeding 3 inches
15Angle, shape and section, C channels of imperial size exceeding C 12 inches by 25 lbs/ft
16Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of grade 201, 304, 316, 321, 327, 409, 420, 430 or 450
17Flat-rolled product, clad, plated or coated, of grade 4140
18Flat-rolled product, clad, plated or coated, of grade 4142
19Bar and rod, not further worked than cold-formed or cold-finished, of grade AMS 6425
20Pipe and tube, seamless, of grade AISI 1026
21Pipe and tube, seamless, of grade AISI 1045
22Pipe and tube, of grade AISI 1526M
23Pipe and tube, seamless, of grade 4140, of circular cross-section
24Pipe and tube, seamless, of grade 4142, of circular cross-section
25Pipe and tube, of grade 4140, vacuum degassed, of a minimum yield strength of 80,000 psi, of outside diameter from 3.25 inches to 8 inches inclusive
26Pipe and tube, welded, of circular cross-section, of grade AISI 1526
27Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 2 inches by 1.5 inches, of grade CSA G40.21, ASTM A252 or ASTM A500
28[Repealed, SOR/2019-262, s. 23]
29[Repealed, SOR/2019-262, s. 23]
30[Repealed, SOR/2019-262, s. 23]
31[Repealed, SOR/2019-262, s. 23]
32Flat-rolled product, not further worked than hot-rolled, of grade CSA G40.21 350W or CSA G40.21 350W Category 1, of a thickness of 3.27 inches or 3.50 inches, of a width of 72 inches or 76 inches, of a length of 544 inches, 550 inches or 552 inches
33Hot-rolled abrasion resistant plate, of grade 200, of a thickness of 0.25 inches, of a width of 96 inches, of a length of 240 inches or 288 inches
34Hot-rolled abrasion resistant plate, of grade 200, of a thickness from 0.3125 inch to 0.313 inch inclusive, of a width of 120 inches, of a length of 240 inches or 288 inches
35Hot-rolled abrasion resistant plate, of grade 200, of a thickness of 0.625 inches, of a width of 96 inches, of a length of 240 inches or 288 inches
36Flat-rolled product, of specification GMW3399M-ST-S-CR780T/420Y-DP-UNCOATED-U, of a width of 622.30 mm, of a thickness of 1.2 mm
37Flat-rolled product, not further worked than cold-rolled, of grade HSLA 80, of a minimum thickness of 0.0756 inch, of a width of 51.975 inches
38Flat-rolled product, not further worked than cold-rolled, of grade HSLA 60, of a minimum thickness of 0.022 inch, of a width of 52.46 inches
39Flat-rolled product, not further worked than cold-rolled, of grade HSLA 60, of a minimum thickness of 0.037 inch, of a width of 40.34 or 47.695 inches
40Flat-rolled product, not further worked than cold-rolled, of grade HSLA 60, of a minimum thickness of 0.0377 inch, of a width of 44 inches
41High carbon cold rolled-strip, full hard and oscillated coils, of grade SAE 1035, of a thickness of 0.055 inch, of a width of 0.75 inches
42Flat-rolled product of iron or non-alloy steel, spheroidized and annealed, of grade SAE J403 C1050 or C1050 SA, of a thickness from 2.9mm to 7.1mm inclusive, of a width from 33.78 mm to 245 mm inclusive
43Special Bar Quality (SBQ) bars, of grade AISI C-1536, A-4623-M, C-1541-VM, OP15, A-4320-M, A-4138-M, A-4330-M or A-4142-M, of chemical analysis in accordance with ASTM A751, of tensile strength in accordance with ASTM A370, of hardness in accordance ASTM E18, of a diameter from 0.625 inches to 1.5 inches inclusive, of a length from 25 feet to 30.2 feet inclusive
44Round bar, of grade C1045, of a diameter from 0.375 inch to 10 inches inclusive, turned, ground and polished (TG&P), of a minimum tensile strength of up to 100,000 psi
45Round bar, of grade C1045, turned and polished (TP), of a diameter of 0.375 inch to 10 inches inclusive
46Bar and rod, of grade 1537M, 4119M or 4318M, of a diameter from 19.05 mm to 30.16 mm inclusive
47Bar and rod, of grade 4330, 4330M or 4330NiMo5VCa4, of minimum yield strength of up to 165,000 psi inclusive, of a diameter from 1 inch to 4.062 inches inclusive
48Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade 4330V MOD, of an outside diameter of 2.5 inches or 3.25 inches
49Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade 4145H MOD, of an outside diameter of 2.875 inches
50Angle, of iron or non-alloy steel, L section, not further worked than hot-rolled, hot-drawn or extruded, of grade A588-B, of a height of less than 3.15 inches, of leg dimensions of 3 inches by 2.5 inches, of a thickness of 0.375 inch, of a length of 20 feet
51Aluminum bars, rods and profiles, of aluminum alloy AA2024 or AA2196
52Flat-rolled product of iron or non-alloy steel, not in coils, of grade ASTM A1011 HSLAS-F Grade 80, of a thickness from 0.071 inch to 0.079 inch inclusive, of a width of up to 20 inches, of a length of up to 120 inches
53Cold drawn round bar of alloy steel, of grade AISI 4140, of specification ASTM A193, ASTM A320 or MS-101, of a diameter from 0.446 inch to 2.914 inches inclusive
54Bar of plain carbon steel, hot-rolled, in irregularly wound coils or not, of specification G30.18 400R, of an outside diameter from 10 mm to 35 mm inclusive, of a yield strength of 400 MPa, of a tensile strength of 540 MPa
55Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, pickled and oiled, of grade SAE 1035 modified, of a thickness from 0.098 inch to 0.118 inch, of a width from 40 inches to 51.5 inches inclusive
56Flat-rolled product, hot-rolled, of specification JSH270E, of a thickness of 0.0985 inch
57Flat-rolled product, cold-rolled, of specficiation GMW3032M-ST-S CR210B2, of a thickness of 0.0614 inch
58Flat-rolled product, cold-rolled, of specification GMW2M CR5, of a minimum thickness of 0.055 inch or 0.06 inch
59Flat-rolled product, cold-rolled, of specification J403 10B21, of a minimum thickness of 0.079 inch or 0.115 inch or of a nominal thickness of 0.12 inch
60Flat-rolled product, cold-rolled, galvanized, of specification GMW3032M CR420LA, of a minimum thickness of 0.035 inch
61Flat-rolled product, galvanized, of specification J2340 490XF, of a minimum thickness of 0.0448 inch or 0.074 inch or of a nominal thickness of 0.079 inch, 0.09 inch or 0.094 inch
62Flat-rolled product, galvannealed, of specification A653 HSLAS Grade 70, of a minimum thickness of 0.045 inch
  • SOR/2018-289, s. 3
  • SOR/2019-262, s. 22
  • SOR/2019-262, s. 23
  • SOR/2019-262, s. 24
  • SOR/2019-262, s. 25
  • SOR/2019-262, s. 26
 
Date modified: