Sept-Iles Airport Zoning Regulations (SOR/78-657)
Full Document:
- HTMLFull Document: Sept-Iles Airport Zoning Regulations (Accessibility Buttons available) |
- XMLFull Document: Sept-Iles Airport Zoning Regulations [70 KB] |
- PDFFull Document: Sept-Iles Airport Zoning Regulations [149 KB]
Regulations are current to 2024-11-26
Sept-Iles Airport Zoning Regulations
SOR/78-657
Registration 1978-08-22
Zoning Regulations Respecting Sept-Iles Airport
P.C. 1978-2587 1978-08-16
His Excellency the Governor General in Council, on the recommendation of the Minister of Transport, pursuant to section 6 of the Aeronautics Act, is pleased hereby to approve the annexed Zoning Regulations respecting Sept-Iles Airport, made by the Minister of Transport.
Short Title
1 These Regulations may be cited as the Sept-Iles Airport Zoning Regulations.
Interpretation
2 (1) In these Regulations,
- airport
airport means Sept-Iles Airport, in the Township of Letellier, in the Province of Quebec; (aéroport)
- airport reference point
airport reference point means the point determined in the manner set out in Part I of the schedule; (point de repère de l’aéroport)
- approach surface
approach surface means an imaginary inclined plane extending upward and outward from each end of a strip along and at right angles to the projected centre line thereof, which approach surface is more particularly described in Part III of the schedule; (surface d’approche)
- Minister
Minister means the Minister of Transport; (ministre)
- outer surface
outer surface means an imaginary surface located above and in the immediate vicinity of the airport, which outer surface is more particularly described in Part IV of the schedule; (surface extérieure)
- strip
strip means the rectangular portion of the landing area of the airport, including the runway prepared for the take-off and landing of aircraft in a particular direction, which strip is more particularly described in Part V of the schedule; (bande)
- transitional surface
transitional surface means an imaginary inclined plane extending upward and outward from the lateral limits of a strip and its approach surfaces, which transitional surface is more particularly described in Part VI of the schedule; (surface de transition)
(2) In these Regulations,
(a) coordinates and azimuths are of the M.T.M. System in which the central meridian of the zone is 67°30′; and
(b) distances are expressed in the metric system.
3 For the purposes of these Regulations, the airport reference point is deemed to be 51.77 metres above sea level.
Application
4 These Regulations apply to all the lands and lands under water, including public road allowances, adjacent to or in the vicinity of the airport, the outer limits of which lands are described in Part II of the schedule, other than such lands as from time to time form part of the airport.
General
5 No person shall erect or construct, on any land to which these Regulations apply, any building, structure or object or any addition to any existing building, structure or object, the highest point of which will exceed in elevation at the location of that point any of the surfaces hereinafter set out that project immediately over and above the surface of the land at that location, namely,
(a) the approach surfaces;
(b) the outer surface; or
(c) the transitional surface.
Natural Growth
6 Where an object of natural growth on any land to which these Regulations apply exceeds in elevation any of the surfaces referred to in section 5, the Minister may make a direction that the owner or occupier of the land on which that object is growing remove the excessive growth.
- SOR/81-178, s. 1
7 [Revoked, SOR/81-178, s. 1]
SCHEDULE(ss. 2 and 4)
PART IDescription of Airport Reference Point
The airport reference point is situated at the provincial geodetic point number 120 M.O.T. within the airport limits, the coordinates of which are E. 392 770.593 metres and N. 5 565 720.089 metres.
PART IIDescription of the Outer Limits of Lands
All and singular those certain parcels or tracts of land and premises being part of the Townships of Arnaud, Letellier and Moisie, Registration Division of Sept-Iles, more particularly described as follows:
Commencing at a point, the coordinates of which are E. 387 541.941 metres and N. 5 564 058.809 metres, being the intersection of the northwesterly limit of the approach surface associated with the strip 10-28 with the arc of a circle, having a radius of 5 486.224 metres, the centre of which being the reference point of the airport; THENCE, following the last-mentioned arc of a circle, in general northerly, easterly and southerly directions, to its intersection with the northeasterly limit of the approach surface associated with the strip 14-32; THENCE, following the last-mentioned northeasterly limit having an azimuth of 99°30′48″ to a point the coordinates of which are E. 409 084.015 metres and N. 5 563 297.666 metres; THENCE, following a line being the southeasterly limit of the approach surface associated with the strip 14-32, having an azimuth of 198°02′39″, a distance of 4 876.50 metres to a point, the coordinates of which are E. 407 573.449 metres and N. 5 558 660.791 metres; THENCE, following the southwesterly limit of the approach surface associated with the strip 14-32, having an azimuth of 296°34′30″, to the intersection with the arc of a circle, having a radius of 5 486.224 metres, the centre of which is the reference point of the airport; THENCE, following the last-mentioned arc of a circle, in general southwesterly, westerly and northwesterly directions, to its intersection with the southeasterly limit of the approach surface associated with the strip 10-28; THENCE, along the said southeasterly limit, having an azimuth of 239°25′11″, to a point, the coordinates of which are E. 378 658.076 metres and N. 5 556 962.838 metres; THENCE, following a line, being the southwesterly limit of the approach surface associated with the strip 10-28, having an azimuth of 337°57′01″, a distance of 4 876.56 metres to a point, the coordinates of which are E. 376 827.371 metres and N. 5 561 482.724 metres; THENCE, following the northwesterly limit of the approach surface associated with the strip 10-28, having an azimuth of 76°28′52″ to the point of commencement.
The said lands, whose outside limits are described above, are made up of the following blocks and lots and parts of blocks and lots:
Township of Arnaud
Township of Letellier
Range I of Village des Sept-Iles
Township of Letellier
Range II of Village des Sept-Iles
Township of Letellier
Range III of Village des Sept-Iles
Township of Letellier
Range IV of Village des Sept-Iles
Township of Letellier
Range I
Township of Letellier
Range II
Township of Moisie
PART IIIDescription of Each Approach Surface
Being a surface abutting each end of the strips associated with runways 06-24, 10-28 and 14-32 and more particularly described as follows:
(a) a surface abutting the end of the strip associated with runways 10-28 and 14-32 consisting of an inclined plane having a ratio of one (1) metre measured vertically to fifty (50) metres measured horizontally and having:
(i) the outer ends 14 and 28 rising to an imaginary horizontal line drawn at right angles to the projected centre line of the strip, 60.96 metres measured vertically above the elevation at the end of the strip and 3 047.90 metres measured horizontally from the end of strip 14 and 3 047.95 metres measured horizontally from the end of strip 28, the outer ends of the imaginary horizontal line being 609.6 metres from the projected centre line of the strip, and
(ii) the outer ends 10 and 32 rising to an imaginary horizontal line drawn at right angles to the projected centre line of the strip, 304.8 metres measured vertically above the elevation at the end of the strip and 15 239.25 metres measured horizontally from the end of strip 10 and 15 239.76 metres measured horizontally from the end of strip 32, the outer ends of the imaginary horizontal line being 2 438.28 metres from the projected centre line of strip 10 and 2 438.25 metres from the projected centre line of strip 32, and
(b) a surface abutting the end of the strip associated with runway 06-24 consisting of an inclined plane having a ratio of one (1) metre measured vertically to forty (40) metres measured horizontally rising to an imaginary horizontal line drawn at right angles to the projected centre line of the strip, 76.2 metres measured vertically above the elevation at the end of the strip and 3 047.90 metres measured horizontally from the end of the strip, the outer ends of the imaginary horizontal line being 381.0 metres from the projected centre line of the strip,
which approach surfaces are shown on Department of Public Works Plan No. M-77-4400, dated the 7th day of March, 1978.
PART IVDescription of the Outer Surface
Being an imaginary surface consisting of:
(a) a common plane established at a constant elevation of 45.72 metres above the assigned elevation of the airport reference point, and
(b) where the common plane described in paragraph (a) is less than 9.144 metres above the surface of the ground, an imaginary surface located 9.144 metres above the surface of the ground,
which outer surface is shown on Department of Public Works Plan No. M-77-4400, dated the 7th day of March, 1978.
PART VDescription of Each Strip
Each strip is described as follows:
(a) the strip associated with runway 10-28 is 304.8 metres in width, 152.4 metres on each side of the centre line of the runway and 2 560.32 metres in length,
(b) the strip associated with runway 14-32 is 304.8 metres in width, 152.4 metres on each side of the centre line of the runway and 2 255.52 metres in length, and
(c) the strip associated with runway 06-24 is 152.4 metres in width, 76.2 metres on each side of the centre line of the runway and 1 919.08 metres in length,
which strips are shown on Department of Public Works Plan No. M-77-4400, dated on the 7th day of March, 1978.
PART VIDescription of Each Transitional Surface
Being a surface consisting of an inclined plane having a ratio of one (1) metre measured vertically to seven (7) metres measured horizontally at right angles to the centre line and centre line produced of the strip, and extending upward and outward from the lateral limits of the strip and its approach surfaces to an intersection with the outer surface, an approach surface or another transitional surface of an adjoining strip, which surfaces are shown on Department of Public Works Plan No. M-77-4400, dated the 7th day of March, 1978.
- Date modified: