Mail Receptacles Regulations (SOR/83-743)
Full Document:
- HTMLFull Document: Mail Receptacles Regulations (Accessibility Buttons available) |
- XMLFull Document: Mail Receptacles Regulations [72 KB] |
- PDFFull Document: Mail Receptacles Regulations [219 KB]
Regulations are current to 2024-10-30 and last amended on 2014-11-07. Previous Versions
SCHEDULE VI(s. 15)Specifications for Rural Mail Boxes
Design
1 Every rural mail box shall be designed in such a manner that the name plate or the space reserved for the name of the boxholder is not obscured by the signal device.
Materials
2 The material used for a rural mail box shall
(a) be sufficiently sturdy to bear the weight of the box and contents without distortion; and
(b) be sufficiently weatherproof to enable it to withstand the climate in which it is used.
Box Dimensions
3 The minimum interior dimensions of a rural mail box shall be
(a) 45 cm in length by 17.5 cm in width by 17.5 cm in height, in the case of a rectangular box; and
(b) 45 cm in length by 25 cm in diameter, in the case of a cylindrical box.
Box Opening
4 Every rural mail box shall be equipped with a door that
(a) is located in the front of the box;
(b) cannot be secured with a lock;
(c) has a minimum effective opening of
(i) 17.5 cm in width and 17.5 cm in height, if the opening is rectangular, or
(ii) 25 cm in diameter, if the opening is round;
(d) is capable of remaining in the open position while mail is being deposited or withdrawn and shall be a tight fit and self-sealing when closed;
(e) has a handle, lip, flange or other similar aid for opening it; and
(f) is constructed of a material sturdy enough to withstand normal every day handling.
Signal Device
5 (1) Every rural mail box shall be equipped with a signal device that may be rendered visible above the box and that, when it is so visible, will indicate from a distance, either to the courier or the householder, that mail has been delivered or deposited in the box for pickup.
(2) The signal device referred to in subsection (1) shall be
(a) located on the right hand side when facing the box from the front; and
(b) affixed so that it does not impede vehicular or pedestrian traffic.
(3) The actuating mechanism of the signal device shall not in any way interfere with the interior of the box.
Mounting
6 The mounting hardware for a rural mail box shall be such as to be flush with the bottom of the interior of the box.
- SOR/98-558, s. 7(F)
- SOR/2000-199, s. 15(F)
- Date modified: