PART 2Energy-Using Products (continued)
DIVISION 2Air Conditioners, Condensing Units and Chillers (continued)
SUBDIVISION BLarge Air Conditioners (continued)
119 For the purpose of subsection 5(1) of the Act, the information set out in column 3 of the table to this section must be collected in accordance with the standard set out in column 2 and provided to the Minister in respect of a large air conditioner described in column 1.
|Column 1||Column 2||Column 3|
|1||Large air conditioners manufactured on or after December 31, 1998 and before January 1, 2010||CSA C746-98|
|2||Large air conditioners manufactured on or after January 1, 2010 and before January 1, 2018|
AHRI 340/360 for IEER
|3||Large air conditioners manufactured on or after January 1, 2018||CSA C746-17|
- SOR/2018-201, s. 23
SUBDIVISION CPackaged Terminal Air Conditioners
120 The following definitions apply in this Subdivision.
- CSA C744-04
CSA C744-04 means the joint CSA and AHRI standard ANSI/AHRI 310/380-2004/CAN/CSA-C744-04 entitled Standard for Packaged Terminal Air Conditioners and Heat Pumps. (CSA C744-04)
- CSA C744-14
CSA C744-14 means the joint CSA and AHRI standard ANSI/AHRI 310/380-2014/CAN/CSA-C744-14 entitled Standard for Packaged Terminal Air Conditioners and Heat Pumps. (CSA C744-14)
- CSA C744-17
CSA C744-17 means the joint CSA and AHRI standard ANSI/AHRI 310/380-2017/CAN/CSA-C744-17 entitled Packaged terminal air-conditioners and heat pumps. (CSA C744-17 )
- packaged terminal air conditioner
packaged terminal air conditioner means a factory-built packaged terminal air conditioner that
(a) consists of a wall sleeve and a separate unencased cooling component and is intended to cool a single room or zone; or
(b) consists of a wall sleeve and a separate unencased combination of heating and cooling components and is intended to heat and cool a single room or zone. (climatiseur terminal autonome)
- SOR/2018-201, s. 24
Marginal note:Energy-using product
(2) However, for the purposes of sections 4, 5 and 122, a packaged terminal air conditioner is not considered to be an energy-using product unless it is manufactured on or after December 31, 1998.
Marginal note:Energy efficiency standards
Marginal note:Testing standard
(2) A packaged terminal air conditioner complies with the energy efficiency standard if it meets that standard when tested in accordance with testing procedures established by the standard set out in column 1 that are applicable to a packaged terminal air conditioner as defined in section 120.
Column 1 Column 2 Column 3 Item Standard Energy Efficiency Standard Period of Manufacture 1 CSA C744-04 CSA C744-04, Table 2 On or after December 31, 1998 and before September 30, 2012 2 CSA C744-14 CSA C744-14, Table 2 On or after September 30, 2012 and before January 1, 2017 3 CSA C744-17 CSA C744-17, Table 2 On or after January 1, 2017
- SOR/2018-201, s. 25
(2) The information must be collected in accordance with
- SOR/2018-201, s. 26
SUBDIVISION DSingle Package Central Air Conditioners
124 The following definitions apply in this Subdivision.
- off mode power consumption
off mode power consumption means the power consumption when the unit is connected to mains power but is not providing cooling or heating. (consommation d’énergie en mode arrêt)
- single package central air conditioner
single package central air conditioner means a single-phase or three-phase central air conditioner that is a single package unit and that has a cooling capacity of less than 19 kW (65,000 Btu/h). It does not include a single package vertical air conditioner. (climatiseur central monobloc)
through-the-wall means, in respect of a single package central air conditioner, one that has a cooling capacity less than or equal to 8.79 kW (30,000 Btu/h) and that is designed to be installed through an exterior wall. (mural)
- SOR/2019-163, s. 18
- Date modified: